User Manual

Specifications
PIKE Technical Manual V5.1.2
100
PIKE F-1600B/C (fiber)
Feature Specification
Image device Type 35 mm (diag. 43.3 mm) progressive scan KODAK IT CCD
KAI-16000 with Super HAD microlens
Effective chip size 36.1 mm × 24 mm
Cell size 7.4 μm x 7.4 μm
Picture size (max.) 4872 x 3248 pixels
Lens mount Standard: F-Mount: 46.5 mm (in air)
maximum protrusion: 26 mm
(see Figure 27: Pike F-Mount dimensions (standard for Pike F-1100
and Pike F-1600) on page 72)
Optional: M42-Mount: 45.5 mm (in air)
maximum protrusion: 28 mm
(Figure 34: Pike M42-Mount dimensions (optional for Pike F-1100 and
Pike F-1600) on page 79)
Optional: M58-Mount: 20.5 mm (in air)
maximum protrusion: 8 mm
(Figure 40: Pike M58-Mount dimensions (optional for Pike F-1100 and
Pike F-1600) on page 85)
ADC 14 bit
Color modes Only color: Raw8, Raw12, Raw16, Mono8, YUV422, YUV411, RGB8
Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps
up to 1.7* fps (single-tap) / up to 3.1* fps (dual-tap) in Format_7
(Mono8 no sub-sampling)
* at 11000 bytes per packet
User can switch between single-tap and dual-tap.
Gain control Manual: 0-24 dB (0.0359 dB/step); auto gain (select. AOI)
Shutter speed 636 μs … 67,108,864 μs (~67s); auto shutter (select. AOI)
External trigger shutter Programmable, trigger level control, single trigger,
bulk trigger, programmable trigger delay
Internal FIFO memory Up to 5 frames
Look-up tables 16 user-defined (14 bit  14 bit); gamma (0.45 and 0.7)
Table 22: Specification PIKE F-1600B/C (fiber)