User Manual

Introduction
PIKE Technical Manual V5.1.2
14
continued from last page
V3.2.0 22.08.2007 Minor corrections
Added CE in Chapter Conformity on page 33.
Added Value field in Table 44: CSR: Shutter on page 145.
Added Chapter Cross section: CS-Mount (only PIKE F-032B/C) on
page 62.
Added detailed description of BRIGHTNESS (800h) in Table 147:
Feature control register on page 319
Added detailed description of WHITE-BALANCE (80Ch) in Table
147: Feature control register on page 319 et seq.
Added Appendix, Chapter Sensor position accuracy of AVT cam-
eras on page 378.
Added new frame rates in Chapter Specifications on page 86
Added new AOI frame rates and diagrams in Chapter Frame rates
Format_7 on page 260
New minimum shutter speeds for each of the Pike cameras in
Chapter Specifications on page 86 and the following
Added new features of PIKE update round:
• SIS: see Chapter Secure image signature (SIS): definition
and scenarios on page 233
• Sequence mode: see Chapter Sequence mode on page 224
•Smear reduction
see Chapter Smear reduction (not Pike F-1100/1600) on
page 235
• 4 x / 8 x binning and sub-sampling modes
see Chapter Binning (only Pike b/w models) on page 170
see Chapter Sub-sampling (PIKE b/w and color) on page
175
see Chapter Binning and sub-sampling access on page 182
• Quick mode for format changes
see Chapter Quick parameter change timing modes on page
184
• Speed increase mode (Packed 12-bit Mode)
Chapter Packed 12-Bit Mode on page 189
• CS-Mount (only for PIKE F-032)
Chapter PIKE F-032B/C (fiber) on page 86 and Chapter
Cross section: CS-Mount (only PIKE F-032B/C) on page 62
to be continued on next page
Version Date Remarks
Table 1: Document history