User Manual

Introduction

PIKE Technical Manual V5.1.2

continued from last page

V4.1.0 20.08.08 Added PIKE F-505 to Chapter Index on page 381

Revised formulas by adding some units in Chapter How does

bandwidth affect the frame rate? on page 288

Corrected Table 172: Advanced register: Channel balance on

page 352

Added Max IsoSize Bit [1] to register 0xF1000048 ADV_INQ_3 in

Table 153: Advanced register: Advanced feature inquiry on page

331f.

Added Chapter Maximum ISO packet size on page 355 (useful for

PIKE F-505 for higher frame rates)

Corrected Figure 104: Former standard timing on page 184

Added photos of 1394b locking connectors and 1394a Molex

clamp locking (aka Interlock) connectors in Chapter 1394a and

1394b cameras and compatibility on page 39.

Added recommendation to use PCI-X (64 bit) or PCI Express

adapter in Chapter Maximum ISO packet size on page 355.

Corrected frame rate formula in Chapter High SNR mode (High

Signal Noise Ratio) on page 190.

Corrected binning order in Chapter 2 x full binning/4 x full bin-

ning/8 x full binning on page 174.

Added block diagram of modern PC (X38 chipset by INTEL) in Fig-

ure 5: Block diagram of modern PC (X38 chipset by INTEL) on

page 39

Revised FireWire hot-plug precautions and added screw-lock pre-

cautions in Chapter FireWire hot-plug and screw-lock precau-

tions on page 44

Added images of FireWire locking cables in Figure 4: 1394a and

1394b cameras and compatibility on page 39

Added list of available FireWire screw lock cables in Table 4: 1394

locking cables on page 35

Corrected CAD drawing in Figure 12: Pike W90 S90 (2 x 1394b

copper) on page 56

Changed provisions directive to 2004/108/EG in Chapter Confor-

mity on page 33

Corrected diag. (16.3 mm) of KAI2093 in Table 18: Specification

PIKE F-210B/C (fiber) on page 92

to be continued on next page

Version Date Remarks

Table 1: Document history