User Manual

Introduction
PIKE Technical Manual V5.1.2
20
continued from last page
V4.4.0 28.09.09 Added notice to description of non-volatile storage of shading
image in Note on page 156.
Corrected drawing in Figure 151: Delayed integration timing on
page 346
Corrected Format_7 Mode_5 (640 x 240) in Table 84: Video
Format_7 default modes PIKE F-032B / PIKE F-032C on page 238.
Added Raw12 to Pike F-032C and corrected some frame rates in
Table 84: Video Format_7 default modes PIKE F-032B / PIKE F-
032C on page 238f.
New dual-tap offset adjustment for Pike F-032/210/421/505:
•See 0xF1000430 on page 327
•See Table 173: Advanced register: Dual-tap offset adjust-
ment on page 352
• See Chapter Dual-tap offset adjustment with SmartView
(1.10 or greater) on page 137
• Revised Chapter Conformity on page 33.
New Pike front flange:
• Title page: new photo and Figure 21: Back focus adjustment
on page 65: new Pike drawing
•New CAD drawings:
–Chapter Camera dimensions on page 50ff.
– Figure 21: Back focus adjustment on page 65 (adjusting
C-Mount via both screws on top (middle) and right sight
of the housing
Added PWM feature:
• Added PWM feature in IO_OUTP_CTRL 1-4 on page 122ff.
• Added PWMCapable in Register 0xF1000320 in Table 31:
Advanced register: Output control on page 122
• Added ID 0x09 in Table 32: Output routing on page 123
• Added Chapter Pulse-width modulation on page 125ff.
•Added Table 33: PWM configuration registers on page 125
•Added PWM in Table 153: Advanced register: Advanced fea-
ture inquiry on page 331f.
•Added PWM in Table 150: Advanced registers summary on
page 325ff.
to be continued on next page
Version Date Remarks
Table 1: Document history