User Manual

Introduction
PIKE Technical Manual V5.1.2
22
continued from last page
V5.0.0
[continued]
07.05.10
[continued]
[continued]
New Pike F-1100 and Pike F-1600 models:
•Chapter F-Mount on page 66ff.
•Chapter M42-Mount on page 74ff.
•Chapter M58-Mount on page 80ff.
•Chapter Exposure time offset on page 215
•Chapter Minimum exposure time on page 215
• Figure 114: Data flow and timing after end of exposure on
page 220
• Table 78: Jitter at exposure start (no binning, no sub-sam-
pling) on page 223
• Table 199: Default gain references of Pike models on page
377
•Chapter Software feature control (disable LEDs / switch sin-
gle-tap and dual-tap) on page 359
•Chapter PIKE F-1100B / PIKE F-1100C on page 249
•Chapter PIKE F-1600B / PIKE F-1600C on page 251
•Chapter PIKE F-1100: AOI frame rates on page 272ff.
•Chapter PIKE F-1600: AOI frame rates on page 280ff.
New Pike front flange:
• Serial numbers for Pike camera models starting new front
flange: Chapter Serial numbers for starting new front
flange on page 50
• Added photo of Pike 11M/16M on title page
Minor corrections and improvements:
• Improved description on low noise binning: Chapter Low-
noise binning mode (only 2 x H-binning) on page 358
• Corrected MaxValue from [0..31] to [6..31] in Table 166:
Advanced register: Auto shutter control on page 347
• Corrected: Pike F-145C has Raw12 formats (F7M0, F7M4,
F7M5, F7M6) in Table 88: Video Format_7 default modes
Pike F-145B / F-145C on page 242
• Improved description of debounce feature in Chapter
Debounce on page 213
New storage temperature:
• 70 °C, see Chapter Specifications on page 86ff.
to be continued on next page
Version Date Remarks
Table 1: Document history