User Manual

Introduction

PIKE Technical Manual V5.1.2

continued from last page

V5.0.1

[continued]

08.06.10

[continued]

Changed and new CAD drawings for Pike F-1100/1600:

• Changed CAD drawings with corrected mount dimensions:

see Figure 27: Pike F-Mount dimensions (standard for Pike

F-1100 and Pike F-1600) on page 72, Figure 34: Pike M42-

Mount dimensions (optional for Pike F-1100 and Pike F-

1600) on page 79 and Figure 40: Pike M58-Mount dimen-

sions (optional for Pike F-1100 and Pike F-1600) on page

85.

• Added CAD drawings for Pike F-1100/1600 GOF versions

incl. W270 models: Chapter Camera dimensions on page

50ff.

V5.0.2 09.08.10 Changed sensitivity curve:

• For Pike F-032B: due to new KODAK sensor data sheet for

KAI-0340, the new sensitivity curve was added, see Figure

41: Spectral sensitivity of Pike F-032B on page 103.

Changed trigger diagram:

• Added trigger delay and connection between trigger delay

and Busy signal, see Figure 63: Output impulse diagram on

page 124

New file format:

• Converted FrameMaker files from FM7 to FM9

Improved description of HSNR mode:

• Added info that for 8-bit video modes, the internal HSNR

calculations are done with 14 bit: Chapter High SNR mode

(High Signal Noise Ratio) on page 168

to be continued on next page

Version Date Remarks

Table 1: Document history