User Manual

Video formats, modes and bandwidth
PIKE Technical Manual V5.1.2
276
AOI frame rates maxBPP=11000, single-tap, no sub-sampl.
Figure 132: Pike F-1100 [width=4008] (maxBPP=11000, single-tap, no sub-sampling)
AOI height CCD RAW8 RAW12 RAW16 YUV411 YUV422 RGB8
2672 2.636 2.6 2.6 2.6 2.6 2.6 2.6
2048 3.349 3.3 3.3 3.3 3.3 3.3 3.3
1200 5.297 5.2 5.2 5.2 5.2 5.2 5.2
1024 6.024 6.0 6.0 6.0 6.0 6.0 6.0
960 6.340 6.3 6.3 6.3 6.3 6.3 6.3
600 8.998 8.9 8.9 8.9 8.9 8.9 8.9
480 10.46 10.4 10.4 10.4 10.4 10.4 10.4
300 13.82 13.8 13.8 13.8 13.7 13.7 13.7
240 15.49 15.4 15.4 15.4 15.4 15.4 15.4
Figure 133: Pike F-1100 [width=4008] (maxBPP=11000, single-tap, no sub-sampling)
Note

CCD = theoretical max. frame rate (in fps) of CCD
maxBPP: for explanation and configuration see Chapter
Maximum ISO packet size on page 355
Frame rate = f(AOI height) *PIKE F-1100* (max BPP = 11000; single-tap; no sub-sampling)
0
2
4
6
8
10
12
14
16
18
20
22
24
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800
AOI height / pixel
Frame rate / fps
RAW8 RAW12, YUV411 RAW16, YUV422 RGB8 CCD