User Manual

Configuration of the camera
PIKE Technical Manual V5.1.2
328
0xF1000640 SWFEATURE_CTRL See Table 180: Advanced register: Software feature
control (disable LEDs/switch single-tap and dual-
tap) on page 359
0xF1000800
0xF1000804
IO_OUTP_PWM1 See Table 33: PWM configuration registers on page
125
0xF1000808
0xF100080C
IO_OUTP_PWM2
0xF1000810
0xF1000814
IO_OUTP_PWM3
0xF1000818
0xF100081C
IO_OUTP_PWM4
0xF1000840 IO_INP_DEBOUNCE_1
0xF1000850 IO_INP_DEBOUNCE_2
0xF1000860 IO_INP_DEBOUNCE_3
0xF1000870 IO_INP_DEBOUNCE_4
0xF1000A00 FRAMETIME_CTRL see Frame time control on page 375
0xF1000A04
0xF1000A08
0xF1000FFC GPDATA_INFO see Table 196: Advanced register: GPData buffer on
page 376
0xF1001000
...
0xF100nnnn
GPDATA_BUFFER
0xF1100000 PARRAMLIST_INFO see Chapter Parameter-List Update on page 361
0xF1101000 PARAMLIST_BUFFER
0xF1002000 AFEREFERENCES see Chapter User adjustable gain references on
page 377
Note

Advanced features should always be activated before accessing
them.
Note

• Currently all registers can be written without being acti-
vated. This makes it easier to operate the camera using
Directcontrol.
• AVT reserves the right to require activation in future ver-
sions of the software.
Register Register name Remarks
Table 150: Advanced registers summary