User Manual

Configuration of the camera

PIKE Technical Manual V5.1.2

346

Delayed Integration enable

A delay time between initiating exposure on the sensor and the activation edge

of the IntEna signal can be set using this register. The on/off flag activates/

deactivates integration delay. The time can be set in μs in DelayTime.

Note



• Only one edge is delayed.

•If IntEna_Out is used to control an exposure, it is possi-

ble to have a variation in brightness or to precisely time a

flash.

Figure 151: Delayed integration timing

0xF1000340 IO_INTENA_DELAY Presence_Inq [0] Indicates presence of this

feature (read only)

--- [1..5] Reserved

ON_OFF [6] Enable/disable integration

enable delay

--- [7..11] Reserved

DELAY_TIME [12..31] Delay time in μs

Table 165: Advanced register: Delayed Integration Enable

Integration time Integration time

IntEna_real

IntEna_out

Delay

time

Delay

time