User Manual

Configuration of the camera

PIKE Technical Manual V5.1.2

354

High SNR mode (High Signal Noise Ratio)

With High SNR mode enabled the camera internally grabs GrabCount images

and outputs a single averaged image.

Note



When SOFT_RESET has been defined, the camera will respond

to further read or write requests but will not process them.

0xF1000520 HIGH_SNR Presence_Inq [0] Indicates presence of this feature

(read only)

--- [1..5] Reserved

ON_OFF [6] High SNR mode on/off

The camera must be idle to toggle

this feature on/off. Idle means: no

image acquisition, no trigger.

Set grab count and activation of

HighSNR in one single write

access.

--- [7..22] Reserved

GrabCount [23..31] Number of images (min. 2)

images with n=1..8 (automati-

cally)

Table 175: Advanced register: High Signal Noise Ratio (HSNR)

Note



• The camera must be idle to toggle this feature on/off.

Idle means: no image acquisition, no trigger.

• Set grab count and activation of HighSNR in one single

write access.