User Manual

Configuration of the camera

PIKE Technical Manual V5.1.2

367

Advanced register: trigger counter

The trigger counter feature is controlled by the following advanced feature reg-

ister:

Having this feature enabled, the current trigger counter value (external trigger

seen by hardware) will be inserted as a 32-bit integer value into any captured

image.

Setting the Reset flag to 1 resets the trigger counter to 0: the Reset flag is self-

cleared.

The ON_OFF and LinePos fields are simply mirrors of the time stamp feature.

Settings of these fields are applied to all image stamp features.

Additionally there is a register for direct read out of the trigger counter value.

0xF1000620 TRIGGER_COUNTER Presence_Inq [0] Indicates presence of this feature

(read only)

Reset [1] Reset trigger counter

--- [2..31] Reserved

0xF1000624 TRGCNT TriggerCounter [0..31] Trigger counter

Table 188: Advanced register: Trigger counter

Note



The 4 bytes of the trigger counter value will be inserted as the

9th to 12th byte of a line.