User Manual

Configuration of the camera
PIKE Technical Manual V5.1.2
377
User adjustable gain references
This register gives the user the possibility (via direct access) to modify the gain
references. Modified values are stored automatically without further user
action and are also stored on restart.
To reload default gain references (which are programmed at personalization)
within the camera: set flag m_bDefGainRef=1
In the following table you find the default gain references of all Pike models:
*: Firmware package version 00.03.00.01 or earlier
Offset Name Field Bit Description
0xF1002000 AFEREFERENCES Presence_Inq [0] Indicates presence of this feature
(read only)
--- [1..4] Reserved
m_bDefGainRef [5] Reload default gain references, if
this flag is set.
--- [6..31] Reserved
0xF1002004 GAINREFERENCE m_GainRef [0..31] Gain reference (0..511)
Table 198: Advanced register: User adjustable gain references
Pike model Default gain reference (decimal) Default gain reference (hex)
Pike F-032B/C 200 C8h
Pike F-100B/C 210 D2h
Pike F-145B/C (15fps) 30 (15*) 1Eh (0Fh*)
Pike F-145B/C (30fps) 85 (15*) 55h (0Fh*)
Pike F-210B/C 215 D7h
Pike F-421B/C 200 C8h
Pike F-505B/C 205 (130*) CDh (82h*)
Pike F-1100B/C 228 E4h
Pike F-1600B/C 193 C1h
Table 199: Default gain references of Pike models