User Manual

Specifications

PIKE Technical Manual V5.1.2

PIKE F-145B/C (fiber) (-15fps*)

* Variant: F-145-15fps only

This variant offers lower speed (only 15 fps), but better image quality.

Feature Specification

Image device Type 2/3 (diag. 11.2 mm) type progressive scan SONY ICX285AL/AQ

with EXview HAD microlens

Effective chip size 9.0 mm x 6.7 mm

Cell size 6.45 μm x 6.45 μm

Picture size (max.) 1388 x 1038 pixels (Format_7 Mode_0)

Lens mount Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)

mechanical flange back to filter distance: 12.5 mm

(see Figure 20: Pike C-Mount dimensions (large filter) on page 64)

ADC 14 bit

Color modes Only color: Raw8, Raw12, Raw16, Mono8, YUV422, YUV411, RGB8

Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps (* Variant: F-145-15fps only

up to 15 fps)

up to 30 (16*) fps in Format_7 (Mono8/12 no sub-sampling)

Gain control Manual: 0-32 dB (0.0358 dB/step); auto gain (select. AOI)

Shutter speed 39 (71*) μs … 67,108,864 μs (~67s); auto shutter (select. AOI)

External trigger shutter Programmable, trigger level control, single trigger,

bulk trigger, programmable trigger delay

Internal FIFO memory Up to 22 frames

Look-up tables 16 user-defined (14 bit  14 bit); gamma (0.45 and 0.7)

Smart functions AGC (auto gain control), AEC (auto exposure control), real-time shad-

ing correction, LUT, 64 MByte image memory, mirror, binning, sub-

sampling, High SNR, storable user sets

only color: AWB (auto white balance), color correction, hue, satura-

tion, sharpness

Two configurable inputs, four configurable outputs

RS-232 port (serial port, IIDC V1.31)

Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s

Digital interface IEEE 1394b (IIDC V1.31), 2 x copper connectors (bilingual) (daisy

chain)

fiber: IEEE 1394b, 2 connectors: 1 x copper (bilingual), 1 x GOF con-

nector (2 x optical fiber on LCLC), (daisy chain)

Power requirements DC 8 V - 36 V via IEEE 1394 cable or 12-pin HIROSE

Power consumption Typical 5 W (@ 12 V DC); fiber: typical 5.75 W (@ 12 V DC)

Table 17: Specification PIKE F-145B/C (fiber)