User Manual

Specifications
PIKE Technical Manual V5.1.2
99
Smart functions AGC (auto gain control), AEC (auto exposure control), real-time shad-
ing correction, LUT, 256 MByte image memory, mirror, binning, sub-
sampling, High SNR, storable user sets
only color: AWB (auto white balance), color correction, hue, satura-
tion, sharpness
Two configurable inputs, four configurable outputs
RS-232 port (serial port, IIDC V1.31)
Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s
Digital interface IEEE 1394b (IIDC V1.31), 2 x copper connectors (bilingual) (daisy
chain)
fiber: IEEE 1394b, 2 connectors: 1 x copper (bilingual), 1 x GOF con-
nector (2 x optical fiber on LCLC), (daisy chain)
Power requirements DC 8 V - 36 V via IEEE 1394 cable or 12-pin HIROSE
Power consumption Typical single-tap: 5 W (@ 12 V DC);
fiber: typical 5.5 W (@ 12 V DC)
Typical dual-tap: 5.5 W (@ 12 V DC);
fiber: typical 6.0 W (@ 12 V DC)
Dimensions 142.8 mm x 59 mm x 59 mm (L x W x H); incl. connectors, without tri-
pod and lens
Mass 380 g (without lens)
Operating temperature + 5 °C ... + 50 °C housing temperature (without condensation)
Storage temperature - 10 °C ... + 70 °C ambient temperature (without condensation)
Regulations CE, FCC Class B, RoHS (2002/95/EC)
Standard accessories b/w: protection glass
color: IR cut filter
Optional accessories b/w: IR cut filter, IR pass filter
color: protection glass
On request Host adapter card, angled head, power out (HIROSE)
Software packages Various SKDs with interfaces to ActiveX, DirectShow or Twain (free
charge)
Note

The design and specifications for the products described above
may change without notice.
Feature Specification
Table 21: Specification PIKE F-1100B/C (fiber)