Instruction manual

Configuration of the camera
PIKE Technical Manual V4.0.0
289
Test images
Bits 8-14 indicate which test images are saved. Setting bits 28-31 activates
or deactivates existing test images.
By activating any test image the following auto features are automatically
disabled:
• auto gain
• auto shutter
• auto white balance
Register Name Field Bit Description
0xF1000210 TEST_IMAGE Presence_Inq [0] Indicates presence of this feature
(read only)
--- [1..7] Reserved
Image_Inq_1 [8] Presence of test image 1
0: N/A
1: Available
Image_Inq_2 [9] Presence of test image 2
0: N/A
1: Available
Image_Inq_3 [10] Presence of test image 3
0: N/A
1: Available
Image_Inq_4 [11] Presence of test image 4
0: N/A
1: Available
Image_Inq_5 [12] Presence of test image 5
0: N/A
1: Available
Image_Inq_6 [13] Presence of test image 6
0: N/A
1: Available
Image_Inq_7 [14] Presence of test image 7
0: N/A
1: Available
--- [15..27] Reserved
TestImage_ID [28..31] 0: No test image active
1: Image 1 active
2: Image 2 active
…
Table 142: Test image configuration register