Instruction manual

Table Of Contents

Configuration of the camera

PIKE Technical Manual V4.0.0

305

AFE channel compensation (channel balance)

All KODAK PIKE sensors are read out via two channels: the first channel for

the left half of the image and the second channel for the right half of the

image.

Channel gain adjustment (PIKE color cameras only RAW8 and RAW16) can be

done via the following two advanced registers:

Soft Reset

The SOFT_RESET feature is similar to the INITIALIZE register, with the follow-

ing differences:

• 1 or more bus resets will occur

• the FPGA will be rebooted

The reset can be delayed by setting the Delay to a value unequal to 0 - the

delay is defined in 10 ms steps.

0xF1000420 CHANNEL_ADJUST_CTRL Presence_Inq [0] Indicates presence of this

feature (read only)

--- [1..7] Reserved

Save as default [8] Set to 1, if you want to save

your own values.

--- [9..31] Reserved

0xF1000424 CHANNEL_ADJUST_VALUE --- [0..15] Reserved

Balance_Value [16..31] Signed 16 bit value

-8192...0...+8191

SmartView shows only:

-2048...0...+2047

Table 155: Channel balance register

0xF1000510 SOFT_RESET Presence_Inq [0] Indicates presence of this

feature (read only)

--- [1..5] Reserved

Reset [6] Initiate reset

--- [7..19] Reserved

Delay [20..31] Delay reset in 10 ms steps

Table 156: Soft reset register