User guide

Introduction
STINGRAY Technical Manual V4.4.4
16
continued from last page
V3.0.0 08.10.08 New Stingray board level CAD drawing with name of screws
M2x14 ISO7045-A2 (2x):
– Figure 38: Stingray board level: CS-Mount on page 87
– Figure 39: Stingray board level: C-Mount on page 88
New Stingray F-125B/C: Read information in the following sec-
tions:
• Table 14: Specification STINGRAY F-125B/C (fiber) on page
52f.
• Table 54: FIFO memory size on page 169
• Table 65: Camera-specific exposure time offset on page 194
• Table 66: Camera-specific minimum exposure time on page
194
• Figure 99: Data flow and timing after end of exposure on
page 199
• Table 71: Jitter at exposure start (no binning, no sub-sam-
pling) on page 202
• Table 82: Video fixed formats Stingray F-125B / F-125C on
page 221
• Table 83: Video Format_7 default modes Stingray F-125B /
F-125C on page 222
• Table 129: Camera type ID list on page 297
For Stingray F-125B/C output switching times (tp and min.
shutter) see Hardware Installation Guide, subsection
STINGRAY delay
to be continued on next page
Version Date Remarks
Table 1: Document history