User guide

Introduction
STINGRAY Technical Manual V4.4.4
18
continued from last page
V4.1.0 28.01.09 All advanced registers in 8-digit format beginning with 0xF1...
in Chapter Advanced features (AVT-specific) on page 292ff. and
in Chapter Parameter-List Update on page 326
New CAD drawings (hexagon socket head cap screw ISO 4762):
• Figure 37: Stingray board level dimensions on page 86
• Figure 38: Stingray board level: CS-Mount on page 87
• Figure 39: Stingray board level: C-Mount on page 88
• Figure 41: Board level camera: two IEEE 1394b FireWire
connectors on page 91
• Figure 43: Board level camera: I/O pin assignment on page
93
SEQUENCE_RESET register moved to SEQUENCE_STEP register
(0xF1000228) in SEQUENCE_STEP on page 205 and in
SEQUENCE_STEP on page 292
Corrected CAD drawing in Figure 28: Stingray W90 S90 (2 x
1394b copper) on page 77
Revised Chapter White balance on page 117ff
Memory size (Internal FIFO memory) of Stingray F-125 is 12
frames in Table 14: Specification STINGRAY F-125B/C (fiber) on
page 52 and in Table 54: FIFO memory size on page 169
Revised Table 99: Frame rates (fps) Stingray F-125 as function
of AOI height (pixel) [width=1292] on page 248
Corrected black level increments in Chapter Brightness (black
level or offset) on page 127
New AOI frame rates of Stingray F-504 in Chapter Frame rates
of Stingray F-504 as function of AOI height [width=2452] on
page 252
New Stingray F-125C RGB8 modes in Table 82: Video fixed for-
mats Stingray F-125B / F-125C on page 221
New Stingray F-504C RGB8 modes in Table 90: Video fixed for-
mats Stingray F-504B / F-504C on page 234
to be continued on next page
Version Date Remarks
Table 1: Document history