User guide

Introduction
STINGRAY Technical Manual V4.4.4
20
continued from last page
V4.2.0
[continued]
28.05.09
[continued]
Stingray update round (SUR):
•Only GOF models: new LED signals (asynchronous traffic
and signal detect) in Table 20: LEDs showing normal condi-
tions on page 95
• Stingray F-504 cameras are also available with 64 MByte
internal FIFO memory (instead of 32 MByte):
– Table 18: Specification STINGRAY F-504B/C (fiber) on
page 60 and
– Table 54: FIFO memory size on page 169
• All Stingray models: added defect pixel correction:
–Chapter Defect pixel correction on page 140
– Table 142: Advanced register: Defect pixel correction on
page 312
• All Stingray models: added low noise binning mode:
– Table 158: Advanced register: Low noise binning mode
on page 328
• All Stingray models: added software trigger:
– In inquiry register 530h on page 281 added:
Value_Read_Inq [7],
Trigger_Source0_Inq [8] and
Software_Trigger_Inq [15]
– In inquiry register 62Ch on page 283 added:
Software_Trigger
• All Stingray models: added disable LEDs function:
–Chapter Software feature control (disable LEDs) on
page 335
• All Stingray GOF models: added two new LED signals
– Only GOF: asynchronous traffic on page 95
– Only GOF: GOF signal detect on page 95
• All Stingray models: added debounce feature:
– Advanced register summary 0xF1000840 on page 295
– Advanced register summary 0xF1000850 on page 295
– Advanced register summary 0xF1000860 on page 295
– Advanced register summary 0xF1000870 on page 295
–Chapter Debounce on page 192f.
– Table 64: Advanced register: Debounce time for input
ports
on page 193
V4.2.0
[continued]
28.05.09
[continued]
Stingray update round (SUR):
[continued]
• WaitingForTrigger signal for outputs
– Table 27: Output signals on page 101
– Output mode: trigger ID 0x0A on page 104
– Figure 47: Output impulse diagram on page 105
to be continued on next page
Version Date Remarks
Table 1: Document history