User guide

Specifications

STINGRAY Technical Manual V4.4.4

STINGRAY F-145B/C (fiber)

Feature Specification

Image device Type 2/3 (diag. 11 mm) progressive scan SONY IT CCD ICX285AL/AQ

with EXview HAD microlens

Effective chip size 9.0 mm x 6.7 mm

Cell size 6.45 µm x 6.45 µm

Picture size (max.) 1388 x 1038 pixels (Format_7 Mode_0)

Lens mount C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)

maximum protrusion: 10.1 mm

(see Figure 36: Stingray C-Mount dimensions on page 85)

CS-Mount: 12.526 mm (in air), Ø 25.4 mm (32 tpi)

maximum protrusion: 5.1 mm

(see Figure 35: Stingray CS-Mount dimension on page 84)

Note: Maximum protrusion means the distance from lens flange to the

glass filter in the camera.

ADC 14 bit

Color modes Only color: Raw8, Raw12, Raw16, Mono8, YUV422, YUV411, RGB8

Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps

Up to 16 fps in Format_7

Gain control Manual: 0-24.4 dB (0.0359 dB/step); auto gain (select. AOI)

Shutter speed 74 µs … 67,108,864 µs (~ 67 s); auto shutter (select. AOI)

External trigger shutter Programmable, trigger level control, single trigger,

bulk trigger, programmable trigger delay

Internal FIFO memory 32 MByte, up to 10 frames

Look-up tables User programmable (12 bit  10 bit); default gamma (0.45)

Smart functions AGC (auto gain control), AEC (auto exposure control), real-time shad-

ing correction, LUT, 32 MByte image memory, mirror, binning (only

b/w), sub-sampling, High SNR, deferred image transport, SIS (secure

image signature), sequence mode, 4 storable user sets

only color: AWB (auto white balance), color correction, hue, satura-

tion, sharpness

Two configurable inputs, four configurable outputs

RS232 port (serial port, IIDC V1.31)

Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s

Table 15: Specification STINGRAY F-145B/C (fiber)