Specifications

C613-10506-01-REV A Software Release Note AlliedWare Plus Version 5.4.2-0.1 11
show autoboot New Y Y Y Y File Management
Commands
Use this command to display the
Autoboot configuration and status.
show boot Modified Y Y Y Y File Management
Commands
This command now displays the status
of the Autoboot feature.
show running-config
show running-config
interface
show running-config lldp
Modified Y Y Y Y File Management
Commands
These commands are now available
from the Privileged Exec command
mode prompt (awplus#) and the
Global Configuration prompt
(awplus(config)#).
max-fib-routes Modified Y Y Y Y System
Configuration
and Monitoring
Commands
This command now enables you to
control the maximum number of FIB
routes configured. It operates by
providing parameters that enable you
to configure preset maximums and
warning message thresholds.
show cpu Modified Y Y Y Y System
Configuration
and Monitoring
Commands
You can now display CPU processes for
individual stack members.
show cpu history Modified Y Y Y Y System
Configuration
and Monitoring
Commands
You can now display CPU process
history for individual stack members.
show debugging
show diagnostic monitor
pcsping
Modified YYYYSystem
Configuration
and Monitoring
Commands
These commands are now available
from the User Exec command mode
prompt (awplus>) and the Privileged
Exec command mode prompt
(awplus#).
show memory Modified Y Y Y Y System
Configuration
and Monitoring
Commands
You can now display CPU memory for
individual stack members.
show memory history Modified Y Y Y Y System
Configuration
and Monitoring
Commands
You can now display CPU memory
history for individual stack members.
show process Modified Y Y Y Y System
Configuration
and Monitoring
Commands
You can now run this command for
individual stack members.
show router-id Modified Y Y Y Y System
Configuration
and Monitoring
Commands
This command is now available from
the User Exec command mode prompt
(awplus>) and the Privileged Exec
command mode prompt (awplus#).
show system pluggable Modified Y Y Y Y System
Configuration
and Monitoring
Commands
Support for SFP DDM (Digital
Diagnostics Monitoring) and XFP
DOM (Digital Optical Monitoring) has
been added. You can now select all
pluggables on the switch, or a single
pluggable on the switch, or a range of
pluggables on the switch with the
optional <port-list> placeholder.
Table 4: New and modified commands in 5.4.2-0.1
Command Status
x600 x610 x900
SBx908
Software
Reference
Chapter
Description