Specifications

12 Software Release Note AlliedWare Plus Version 5.4.2-0.1 C613-10506-01-REV A
show system pluggable
detail
Modified YYYYSystem
Configuration
and Monitoring
Commands
Support for SFP DDM (Digital
Diagnostics Monitoring) and XFP
DOM (Digital Optical Monitoring)
diagnostics has been added. You can
now select all pluggables on the switch,
or a single pluggable on the switch, or a
range of pluggables on the switch with
the optional <port-list> placeholder.
Additional DDM and DOM
information is displayed, such as OMA
(Optical Module Amplitude) and FEC
BER (Forward Error Correction Bit
Error Rate) and Internal Diagnostic
Calibration, if the SFP or XFP pluggable
transceiver supports DDM or DOM.
show system pluggable
diagnostics
New Y Y Y Y System
Configuration
and Monitoring
Commands
Support for SFP DDM (Digital
Diagnostics Monitoring) and XFP
DOM (Digital Optical Monitoring)
diagnostics has been added. This
command displays diagnostic
information about the pluggable
transceivers that are currently installed
in your switch. See your Allied Telesis
dealer for more information about
supported pluggables for your switch.
show counter log
show exception log
Modified YYYYLogging
Commands
These commands are now available
from the User Exec command mode
prompt (awplus>) and the Privileged
Exec command mode prompt
(awplus#).
show log
show log config
show log permanent
Modified YYYYLogging
Commands
These commands are now available
from the User Exec command mode
prompt (awplus>), the Privileged Exec
command mode prompt (awplus#)
and the Global Configuration
command mode prompt
(awplus(config)#).
card provision New – – – – Switching
Commands
Use this command to pre-configure a
specific empty slot within a chassis
ready for inserting a particular card
type.
clear mac address-table
dynamic
Modified Y Y Y Y Switching
Commands
Use this command to clear the filtering
database of all entries learned for a
selected MAC address, an MSTP
instance, a switch port interface or a
VLAN interface. This command now
includes an optional MSTI instance for
the switch port.
platform enhancedmode
(deprecated)
Deprecated – – Y Y Switching
Commands
This command has been replaced by
the new platform silicon-profile
command.
Table 4: New and modified commands in 5.4.2-0.1
Command Status
x600 x610 x900
SBx908
Software
Reference
Chapter
Description