Specifications

14 Software Release Note AlliedWare Plus Version 5.4.2-0.1 C613-10506-01-REV A
instance priority (MSTP) Modified Y Y Y Y Spanning Tree
Commands
You can now specify <1-63> MSTIs for
a switch port with this revised
command to set the priority for the
switch to become the root bridge for
the specified MSTI.
instance vlan (MSTP) Modified Y Y Y Y Spanning Tree
Commands
The range of MSTIs for a switch port
has increased from <1-15> to <1-63>.
Use this command to create an MST
Instance (MSTI), and associate the
specified VLANs with it. An MSTI is a
spanning tree instance that exists within
an MST region (MSTR). An MSTR can
contain up to 63 MSTIs.
show debugging mstp Modified Y Y Y Y Spanning Tree
Commands
This command is now available from
the User Exec command mode prompt
(awplus>) and the Privileged Exec
command mode prompt (awplus#).
show spanning-tree
show spanning-tree brief
show spanning-tree mst
show spanning-tree mst
config
show spanning-tree mst
detail
show spanning-tree mst
detail interface
show spanning-tree mst
instance
show spanning-tree mst
instance interface
show spanning-tree mst
interface
show spanning-tree mst
detail interface
Modified Y Y Y Y Spanning Tree
Commands
These commands are now available
from the User Exec command mode
prompt (awplus>), the Privileged Exec
command mode prompt (awplus#)
and the Interface Configuration mode
prompt (awplus(config-if)#).
show spanning-tree
statistics
New YYYYSpanning Tree
Commands
This command displays BPDU (Bridge
Protocol Data Unit) statistics for all
spanning-tree instances, and all switch
ports associated with all spanning-tree
instances. Previously, separate show
spanning-tree statistics commands
were applied to specify particular
instances or interfaces, not all instances
and interfaces.
show spanning-tree
statistics instance
Modified Y Y Y Y Spanning Tree
Commands
The range of MSTI instances for a
switch port increased from <1-15> to
<1-63>. This command displays BPDU
(Bridge Protocol Data Unit) statistics
for the specified MST instance, and all
switch ports associated with that MST
instance.
Table 4: New and modified commands in 5.4.2-0.1
Command Status
x600 x610 x900
SBx908
Software
Reference
Chapter
Description