Specifications

C613-10506-01-REV A Software Release Note AlliedWare Plus Version 5.4.2-0.1 15
show spanning-tree
statistics instance interface
Modified Y Y Y Y Spanning Tree
Commands
The range of MSTI instances for a
switch port has increased from <1-
15> to <1-63>. This command
displays BPDU (Bridge Protocol Data
Unit) statistics for the specified MST
(Multiple Spanning Tree) instance and
the specified switch port associated
with that MST instance.
show spanning-tree
statistics interface
Modified Y Y Y Y Spanning Tree
Commands
The range of MSTI instances for a
switch port increased from <1-15> to
<1-63>. This command displays BPDU
(Bridge Protocol Data Unit) statistics
for the specified switch port, and all
MST instances associated with that
switch port.
show spanning-tree vlan
range-index
New YYYYSpanning Tree
Commands
Use this new command to display
information about MST (Multiple
Spanning Tree) instances and the
VLANs associated with them including
the VLAN range-index value for the
switch.
spanning-tree mst instance
spanning-tree mst instance
path-cost
spanning-tree mst instance
priority
Modified Y Y Y Y Spanning Tree
Commands
The range of MSTIs for a switch port
has increased from <1-15> to <1-63>.
spanning-tree mst instance
restricted-role
New YYYYSpanning Tree
Commands
Use this new command to enable the
restricted role for an MSTI (Multiple
Spanning Tree Instance) on a switch
port. Configuring the restricted role for
an MSTI on a switch port prevents the
switch port from becoming the root
port in a spanning tree topology. Use
the no variant of this command to
disable the restricted role for an MSTI
on a switch port. Removing the
restricted role for an MSTI on a switch
port allows the switch port to become
the root port in a spanning tree
topology.
spanning-tree mst instance
restricted-tcn
New YYYYSpanning Tree
Commands
Use this new command in Interface
Configuration mode to set the
restricted TCN (Topology Change
Notification) value to TRUE for the
specified MSTI (Multiple Spanning Tree
Instance). Use the no variant of this
command in Interface Configuration
mode to reset the restricted TCN for
the specified MSTI to the default value
of FALSE.
Table 4: New and modified commands in 5.4.2-0.1
Command Status
x600 x610 x900
SBx908
Software
Reference
Chapter
Description