Specifications

C613-10506-01-REV A Software Release Note AlliedWare Plus Version 5.4.2-0.1 23
ip igmp startup-query-
interval
New Y Y Y Y IGMP and IGMP
Snooping
Commands
Use this command to configure the
IGMP startup query interval for a
VLAN interface in Interface
Configuration mode. The IGMP startup
query interval is the amount of time in
seconds between successive IGMP
General Query messages sent by a
querier during startup. The default
IGMP startup query interval is one
quarter of the IGMP query interval
value.
show debugging igmp Modified Y Y Y Y IGMP and IGMP
Snooping
Commands
This command is now available from
the User Exec command mode prompt
(awplus>) and the Privileged Exec
command mode prompt (awplus#).
show ip igmp groups
show ip igmp interface
show ip igmp proxy
show ip igmp snooping
mrouter
show ip igmp snooping
routermode
show ip igmp snooping
statistics
Modified Y Y Y Y IGMP and IGMP
Snooping
Commands
These commands are now available
from the User Exec command mode
prompt (awplus>) and the Privileged
Exec command mode prompt
(awplus#).
ip pim ssm New Y Y Y Y PIM-SM
Commands
Use this command to define the
Source Specific Multicast (SSM) range
of IP multicast addresses.
show debugging pim
sparse-mode
show ip pim sparse-mode
bsr-router
show ip pim sparse-mode
interface
show ip pim sparse-mode
interface detail
show ip pim sparse-mode
mroute
show ip pim sparse-mode
mroute detail
show ip pim sparse-mode
neighbor
show ip pim sparse-mode
nexthop
show ip pim sparse-mode
rp-hash
show ip pim sparse-mode
rp mapping
Modified Y Y Y Y PIM-SM
Commands
These commands are now available
from the User Exec command mode
prompt (awplus>) and the Privileged
Exec command mode prompt
(awplus#).
Table 4: New and modified commands in 5.4.2-0.1
Command Status
x600 x610 x900
SBx908
Software
Reference
Chapter
Description