Specifications

506503-01Page 22 of 44 Issue 1031
See venting table for maximum venting lengths with this arrangement.
* Use wall support every 24” (610 mm). Use two wall supports if
extension is greater than 24” (610 mm) but less than 48” (1219 mm).
NOTE: One wall support must be 6” (152 mm) from top of each pipe
(intake and exhaust).
FIELD SUPPLIED WALL TERMINATION OR
Figure 29
FIELD SUPPLIED WALL TERMINATION OR
See venting table for maximum venting lengths with this arrangement.
* Use wall support every 24” (610 mm). Use two wall supports if
extension is greater than 24” (610 mm) but less than 48” (1219 mm).
NOTE: One wall support must be 6” (152 mm) from top of each pipe
(intake and exhaust).
Figure 28