Instruction manual

Specifications
PIKE Technical Manual V3.1.0
43
PIKE F-145C / F-145C fiber
Feature Specification
Image device Type 2/3 (diag. 11.2 mm) type progressive scan SONY ICX285
Effective picture elements 1392 (H) x 1040 (V)
Lens mount Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
Mechanical Flange Back to filter distance: 12.5 mm
(see Figure 32: Pike C-Mount dimensions (large filter for Pike F-100,
F-145, F-210, F-421) on page 70)
Picture sizes 320 x 240 pixels (Format_0 Mode_1)
640 x 480 pixels (Format_0 Mode_2 to Mode_5)
800 x 600 pixels (Format_1 Mode_0 to Mode_2)
1024 x 768 pixels (Format_1 Mode_3 to Mode_5)
1280 x 960 pixels (Format_2 Mode_0 to Mode_2)
1388 x 1038 pixels (Format_7 Mode_0)
692 x 1038 pixels (Format_7 Mode_4, 2 out of 4 H-sub-sampling)
1388 x 518 pixels (Format_7 Mode_5, 2 out of 4 V-sub-sampling)
692 x 518 pixels (Format_7 Mode_6, 2 out of 4 full sub-sampling)
Cell size 6.45 µm x 6.45 µm
ADC 14 bit
Color modes Raw8, Raw16, Mono8, YUV4:2:2, YUV4:1:1, RGB8
Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps
up to 30.02 fps in Format_7 (Mono8, Raw8)
up to 30.02 fps (YUV 4:1:1)
up to 22.70 fps (YUV 4:2:2, Raw16)
up to 15.14 fps (RGB8)
Gain control Manual: 0-32 dB (0.0358 dB/step); auto gain (select. AOI)
Shutter speed 36 µs … 67.108.864 µs (~67s); auto shutter (select. AOI)
External trigger shutter Programmable, trigger level control, single trigger,
bulk trigger, programmable trigger delay
Internal FIFO memory Up to 22 frames
# look-up tables 4 user programmable (14 bit Æ 14 bit); gamma (0.45 and 0.7)
Smart functions AGC (auto gain control), AEC (auto exposure control), AWB (auto
white balance), color correction, hue, saturation, real-time shading
correction, LUT, 64 MByte image memory, mirror, sub-sampling,
High SNR, storable user sets
Two configurable inputs, four configurable outputs
RS-232 port (serial port, IIDC V1.31)
Table 19: Specification PIKE F-145C / F-145C fiber