Instruction manual

Specifications
PIKE Technical Manual V3.1.0
49
PIKE F-421B / F-421B fiber
Feature Specification
Image device Type 1.2 (diag. 21.4 mm) type progressive scan KODAK IT CCD
KAI4021
Effective picture elements 2056 (H) x 2062 (V)
Lens mount Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
Mechanical Flange Back to filter distance: 12.5 mm
(see Figure 32: Pike C-Mount dimensions (large filter for Pike F-100,
F-145, F-210, F-421) on page 70)
Picture sizes 640 x 480 pixels (Format_0 Mode_5 and Mode_6)
800 x 600 pixels (Format_1 Mode_2 and Mode_6)
1024 x 768 pixels (Format_1 Mode_5 and Mode_7)
1280 x 960 pixels (Format_2 Mode_2 and Mode_6)
1600 x 1200 pixels (Format_2 Mode_5 and Mode_7)
2048 x 2048 pixels (Format_7 Mode_0)
1024 x 2048 pixels (Format_7 Mode_1, 2 x H-binning)
2048 x 1024 pixels (Format_7 Mode_2, 2 x V-binning)
1024 x 1024 pixels (Format_7 Mode_3, 2 x full binning)
1024 x 2048 pixels (Format_7 Mode_4, 2 out of 4 H-sub-sampling)
2048 x 1024 pixels (Format_7 Mode_5, 2 out of 4 V-sub-sampling)
1024 x 1024 pixels (Format_7 Mode_6, 2 out of 4 full sub-sampling)
Cell size 7.4 µm x 7.4 µm
ADC 14 bit
Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps
up to 15 fps in Format_7 (Mono8)
Gain control Manual: 0-22 dB (0.0353 dB/step); auto gain (select. AOI)
Shutter speed 93 … 67.108.864 µs (~67s); auto shutter (select. AOI)
External trigger shutter Programmable, trigger level control, single trigger,
bulk trigger, programmable trigger delay
Internal FIFO memory Up to 6 frames
# look-up tables 4 user programmable (14 bit Æ 14 bit); gamma (0.45 and 0.7)
Smart functions AGC (auto gain control), AEC (auto exposure control), real-time
shading correction, LUT, 64 MByte image memory, mirror, binning,
sub-sampling, High SNR, storable user sets
Two configurable inputs, four configurable outputs
RS-232 port (serial port, IIDC V1.31)
Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s
Table 22: Specification PIKE F-421B / F-421B fiber