Technical information

Table Of Contents
ALE SOUND RECEIVED FROM ADDRESS
DISPLAYED ON LINE 2
This state (Figure 3-22) is displayed while receiving sounds. The
radio will remain in this state for 15 seconds or until the operator can-
cels it by pushing a key. The message flag (flashing M) is also set by
this state. The message flag will be removed if a key is pushed while
in the SoundR state. The addresses heard are displayed on the sec-
ond line.
ALE SOUNDING USING ADDRESS
DISPLAYED ON LINE 2
This state (Figure 3-23) is active while transmitting sounds. It can be
selected automatically by a timed sound or manually when the opera-
tor selects sound on the SEND page. This state will remain active
until the sound completes, and then the radio will return to the ALE
idle state.
Operation
3-22
KHF 950/990 Pilots Guide
Rev. 0
Dec/96
ALE SoundR 32 R
ADDRESSHEARD
Figure 3-22 ALE Sound Received From Address
Displayed On Line 2
ALE SoundT 32 T
ADDRESSSENT
Figure 3-23 ALE Sound Using Address Displayed on Line 2