Technical information
Table Of Contents
- TITLE PAGE
- TABLE OF CONTENTS
- INTRODUCTION
- SECTION I
- CHARACTERISTICS OF HF SSB
- ACRONYMS AND DEFINITIONS
- REFERENCES
- HF SSB COMMUNICATIONS
- FREQUENCY
- SKYWAVE PROPAGATION - WHICH FREQUENCY TO
- WHY SINGLE SIDEBAND IS IMPORTANT IN HF
- AMPLITUDE MODULATION (AM)
- SINGLE SIDEBAND OPERATION
- SINGLE SIDEBAND (SSB)
- SUPPRESSED CARRIER VS. REDUCED CARRIER
- SIMPLEX AND SEMI-DUPLEX OPERATION
- AUTOMATIC LINK ESTABLISHMENT (ALE)
- FUNCTIONS OF HF RADIO AUTOMATION
- HOW ALE ASSURES THAT THE BEST COMMUNICA-TIONS
- CHARACTERISTICS OF HF SSB
- SECTION II
- SECTION III
- SECTION IV
- SECTION V
- SECTION VI
- SECTION VII
- ITU MARITIME RADIOTELEPHONE STATIONS
- DESCRIPTION OF SERVICES
- AT&T HIGH SEAS RADIOTELEPHONE SERVICE
- AT & T COAST STATION COVERAGE MAP
- COAST STATION COVERAGE & INFORMATION
- AIRCRAFT REGISTRATION
- OPERATING PROCEDURES FOR USING THE HIGH SEAS RADIOTELEPHONE NETWORK
- AT&T HIGH SEAS COAST STATIONS
- MOBILE MARINE RADIO, INC.
- WORLDWIDE LISTING OF PUBLIC CORRESPONDENCE STATIONS
- MARITIME RADIOTELEPHONE CHANNEL DESIGNATIONS
- SECTION VIII
- SECTION IX
- SECTION X
- SECTION XI
- SECTION XII
- SECTION XIII
DEL RX (DELETE AMD RECEIVED MESSAGE WITH ALL
SELECTED)
When “ALL” is selected the second line changes to indicate that
pressing the ENT key will delete all receive messages
COPY RX (COPY A RECEIVED AMD MESSAGE TO A TRANS-
MIT AMD MESSAGE)
The cursor is automatically placed on the receive message index
when this page is displayed. The receive message index and the
transmit message index can be changed. The copy function allows
the operator to take a received message and place it into the transmit
message area where it can be modified and sent to other radios.
PROGRAM OPERATION
The system program page (Figure 3-40) provides access to the oper-
ation pages. When ‘Operation’ is selected on the system program
page, pressing the ENT key will provide access to the operational
Operation
3-31
KHF 950/990 Pilots Guide
Rev. 0
Dec/96
Del RX ALL
Del. ALL RX Msgs
Figure 3-38 Del RX (Delete AMD Received
Message with ALL Selected)
Copy RX 2
To TX 3
Figure 3-39 Copy RX (copy a received AMD message
to a transmit AMD message)
SYS Program
|Operation
Figure 3-40 SYS Program Operation