Technical information

ChanGroup:
Self ID:
Resp Time:
Slot##
SINGLE ADDRESS ENTRY
The pages below show the entry of a SINGLE type of ALE address.
The address is entered on the second line (Figure 3-54) using the
CRSR and VAR knob while the cursor is in the character cursor
mode.
After entering an address and pushing ENT or moving the cursor, the
next field displayed is the channel group that this address is active on
(Figure 3-55). ALL indicates that this address can be used on all
channels. If the selected channel group is also the scan list, than an
S will appear after the channel group number
Self Address
The next field displayed is the self address (Figure 3-56) to use when
calling this address. The self address field is both field and character
cursorable. The field mode is used to select different self addresses,
the character mode allows review of self addresses that are longer
then the display field. Since there are multiple parameters associat-
ed with a self it must be entered under the SELF selection and can-
not be modified here.
Operation
3-44
KHF 950/990 Pilots Guide
Rev. 0
Dec/96
ADDR SINGLE 100
}ALE15CHARADDRES
Figure 3-54 Single Type Of ALE Address
ADDR SINGLE 100
|ChanGroup: 23S
Figure 3-55 Channel Group Active On