User manual
V
V
P
P
N
N
D
D
U
U
A
A
L
L
-
-
W
W
A
A
N
N
R
R
o
o
u
u
t
t
e
e
r
r
148
Enabled:
Activate SNMP feature. The default is activated.
System Name:
Set the name of the device such as Allnet.
System Contact:
Set the name of the person who manages the device (i.e. John).
System Location:
Define the location of the device (i.e. Taipei).
Get Community Name:
Set the name of the group or community that can view the device
SNMP data. The default setting is "Public".
Set Community Name:
Set the name of the group or community that can receive the device
SNMP data. The default setting is "Private".
Trap Community Name:
Set user parameters (password required by the Trap-receiving host
computer) to receive Trap message.
Send SNMP Trap to:
Set one IP address or Domain Name for the Trap-receiving host
computer.
Apply:
Press “Apply” to save the settings.
Cancel:
Press “Cancel” to keep the settings unchanged.