ALL0300N 300M Wireless Broadband Router ALL02300N 300M Wireless-N Broadband Router Ma Manual 1
ALL0300N 300M Wireless Broadband Router Copyright Statement ALLNET is the registered trademark of ALLNET GmbH. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to ALLNET GmbH. Without the permission of ALLNET GmbH, any individual or party is not allowed to copy, plagiarize, reproduce or translate it into other languages.
ALL0300N 300M Wireless Broadband Router Contents CHAPTER 1 PRODUCT INTRODUCTION ...................... 1 1.1 PACKAGE CONTENTS ............................. 1 1.2 LED INDICATORS AND PORT DESCRIPTION ............. 1 CHAPTER 2 PRODUCT INSTALLATION ........................ 4 CHAPTER 3 HOW TO CONFIGURE TO ACCESS THE INTERNET .................................................................................................. 5 3.1 3.2 3.3 3.4 HOW TO SET THE NETWORK CONFIGURATIONS ............
ALL0300N 300M Wireless Broadband Router CHAPTER 7 VIRTUAL SERVER ...................................... 30 7.1 PORT RANGE FORWARDING ........................ 30 7.2 DMZ SETTINGS ............................... 32 7.3 UPNP SETTINGS .............................. 32 CHAPTER 8 SECURITY SETTINGS ............................... 33 8.1 8.2 8.3 8.4 CLIENT FILTER SETTINGS ....................... MAC ADDRESS FILTER .......................... URL FILTER SETTINGS ......................... REMOTE WEB MANAGEMENT .....
11N Wireless Broadband Router User Guide Chapter 1 Product Introduction Thank you for purchasing the ALLNET Wireless N Broadband Router! This easy-to-use router provides simple configuration interface which enables you to configure it with ease. It is based on the latest IEEE802.11n standard, and is backward compatible with devices of IEEE802.11b/g standards.
11N Wireless Broadband Router User Guide Back panel port show 2
11N Wireless Broadband Router User Guide Back panel port description 3
11N Wireless Broadband Router User Guide Chapter 2 Product Installation In this user guide, we take ALL02300N to explain the installation steps. The installation steps of other products are similar to this one. 1. Please use only the included power adapter to power your router. (NOTE: Use of an unmatched power adapter could cause damage to this product). 2. Please connect the router’s LAN port to your computer with an Ethernet cable as shown below. 3.
11N Wireless Broadband Router User Guide Chapter 3 How to configure to access the Internet 3.1 How to Set the Network Configurations Network Configurations under windows XP 1. Right click “My Network Places” on your computer desktop and select “Properties”. 2. Right click “Local Area Connection” and select “Properties”. 3. Select “Internet Protocol (TCP/IP)” and click “Properties”.
11N Wireless Broadband Router User Guide 4. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to save the configurations. Or select “Use the following IP address” and enter the IP address, Subnet mask, Default gateway as follows: IP Address: 192.168.0.XXX: (XXX is a number from 2~254) Subnet Mask: 255.255.255.0 Gateway: 192.168.0.1 DNS server: You should input the DNS server address provided by your ISP. Otherwise, you can enter 192.168.0.
N Wireless Broadband Router User Guide Network Configurations under windows 7 1. Click the network icon on the lower right corner of your computer desktop, and then click” Open Network and Sharing Center”. 2. Click “Change adapter settings” on the left side of the window. 3. Right click “Local Area Connection” and select “Properties”.
11N Wireless Broadband Router User Guide 4. Double click” Internet Protocol Version 4(TCP/IPv4)". 5. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to save the configurations.
11N Wireless Broadband Router User Guide IP Address: 192.168.0.XXX: (XXX is a number from 2~254) Subnet Mask: 255.255.255.0 Gateway: 192.168.0.1 DNS server: You should input the DNS server address provided by your ISP. Otherwise, you can enter 192.168.0.1. Click “OK” to save the configurations. 3.2 Log in to the Router 1. To access the Router’s Web-based Utility, launch a web browser such as Internet Explorer or Firefox and enter http://192.168.0.1. Press “Enter”. 2.
11N Wireless Broadband Router User Guide 3.3 Fast Internet Access Two kinds of fast access methods are provided on the router’s web-based utility: ADSL dial-up and DHCP. If you select ADSL dial-up, you only need to enter the access account and access password as well as the wireless password, and then click “Ok” to complete the settings. If you select DHCP, you only need to enter the wireless password and click “Ok” to complete the settings.
11N Wireless Broadband Router User Guide The default access method is ADSL dial-up and the access account and access password are the same as the ADSL dial-up account and password, which you can inquire your broadband ISP. For other access methods, please refer to WAN settings in chapter 4.The wireless password can only consist of 8 characters, the default is ALL02300N and you can modify it when necessary. 3.
11N Wireless Broadband Router User Guide Chapter 4 Advanced Settings 4.1 System Status System status screen allows you to view the router’s WAN port status and system status. Connection status: It displays the router’s WAN connection status. Disconnected: It indicates the router’s WAN port hasn’t been connected with the network cable. Connecting: It indicates the router’s WAN port is obtaining IP address. Connected: It indicates the Router is well connected with the ISP.
11N Wireless Broadband Router User Guide 4.2 WAN Settings Virtual Dial-up (PPPoE) Mode: Show your current connection mode. Access Account: Enter the account provided by your ISP. Access Password: Enter the password provided by your ISP. MTU: Maximum Transmission Unit. It is the size of the largest data packet that can be sent over the network. The default value is 1492.
11N Wireless Broadband Router User Guide Static IP If your ISP provides you the static IP, please choose static IP, and you need to enter the IP address, subnet mask, gateway, DNS server and alternate DNS server provided by your ISP or network administrator。 Mode: Show your current connection mode. IP address: Enter the WAN IP address provided by your ISP. If you are not clear, please inquire your local ISP. Subnet mask: Enter the WAN Subnet Mask provided by your ISP. Generally it is 255.255.
11N Wireless Broadband Router User Guide PPTP Mode: Show your current connection mode. PPTP server address: The IP address or domain name of the destination server and it is used to specify the destination address which needs for PPTP connection. Username/Password: Used to validate identity when connecting to the PPTP server. Address mode: Set the router’s IP address mode, you can select either “Dynamic” or “Static”. If your ISP doesn’t provide the IP address, please select “Dynamic”.
11N Wireless Broadband Router User Guide Subnet mask: Please enter the subnet mask provided by your ISP ,generally its 255.255.255.0 Gateway: Please enter the gateway provided by your ISP, inquire your local ISP if you are not clear. All the above parameters are provided by ISP. 4.3 LAN Settings Click “Advanced settings” – LAN settings to enter the following screen. LAN MAC address: The Router’s LAN MAC address, which is unchangeable.
11N Wireless Broadband Router User Guide 4.5 WAN Medium Type Wired WAN and wireless WAN NOTE: This function applies only to some of the products. Wired WAN: In this mode, the cable is directly connected to the WAN port. Wired WAN is the default mode. Wireless WAN: Enable this mode if your ISP provides you wireless connection service or you want to use it to amplify wireless signals. SSID: SSID (Service Set Identifier) is the identity of the wireless device.
11N Wireless Broadband Router User Guide 4.6 Bandwidth Control Bandwidth control is used to limit the communication traffic of LAN computers when accessing the Internet. It can simultaneously control maximum of 254 PCs' traffic. In addition, IP address range configuration is supported. Enable Bandwidth Control: To enable or disable the internal IP bandwidth control. The default is disabled. IP Address: The IP address range of the hosts whose traffic has been controlled.
11N Wireless Broadband Router User Guide 1. Enter 192.168.0.100 in the IP address field 2. Select upload in the Upload/Download field. 3. Enter 10-15 in the bandwidth range field 4. Select “Enable” 5. Click “Add to list” 6. Click “Ok” to finish the upload rule settings. And then add a download rule as shown in the picture below. The setting method is the same as the above. Example 2 Set the download rate of all computers within the range of 192.168.0.2--192.168.0.
11N Wireless Broadband Router User Guide The setting method is the same as Example 1.
11N Wireless Broadband Router User Guide 4.7 Traffic Statistics Traffic statistics is used to display the bandwidth that LAN PC used. Enable Traffic statistics: It is used to calculate the traffic used by the LAN computers. You can enable it to calculate the traffic for you. Usually, disable it to improve the router’s data packet processing ability, and the default is disabled.
11N Wireless Broadband Router User Guide Chapter 5 WLAN Settings 5.1 Wireless Basic Settings Enable wireless function: Select to enable the Router’s wireless features; deselect to disable it and all functions related with wireless are disabled. Wireless working mode: This router provides two kinds of working modes: Wireless Access Point(AP) and Network Bridge (WDS) Wireless Access Point (AP) Network Mode: Select one mode from the drop-down list.
11N Wireless Broadband Router User Guide not familiar with WMM. APSD Capable: It is used for auto power-saved service. The default is disabled. Channel bandwidth: Select an appropriate channel bandwidth to enhance the wireless performance. Select 20/40M when the network has 11b/g and 11n wireless clients. Select 20M when the network has only non-11n wireless clients. Select 20/40M to promote its throughput when the wireless network is in 11n mode.
11N Wireless Broadband Router User Guide Example: This example is to bridge two ALL02300N routers. 1. If you know the connecting router’s MAC address, please enter it into the AP MAC address field and click “Ok”. 2. You can also search for the wireless router’s signal by scanning. a) Click “Open scan” and click the scanned signal and click the ”Ok” button on the dialog box and the corresponding wireless MAC address will be added to the AP MAC address field automatically.
11N Wireless Broadband Router User Guide After finishing the above steps, you need to set the other ALL02300N router in the same way. NOTE: WDS feature requires both routers support this function and the SSID, channel, encryption method and password are the same as those of the connecting router. 5.2 Wireless Security Settings With the wireless security function, you can prevent others from connecting to your wireless network and using the network resources without your consent.
11N Wireless Broadband Router User Guide NOTE: The use of WPS function requires the wireless adapter to support this function. 5.2.2 WPA- PSK WPA guarantees to protect WLAN users’ data and only the authorized network users can have access to WLAN. WPA Algorithms: Provides TKIP [Temporal Key Integrity Protocol] or AES [Advanced Encryption Standard]. Key: Enter the pass phrase that consists of 8-63 ASCII characters.
11N Wireless Broadband Router User Guide Key: Enter the pass phrase that consists of 8-63 ASCII characters. Key Renewal Interval: Set the key’s renewal period, which tells the device how often it should change the dynamic keys. 5.3 Wireless Access Control Wireless access control is actually based on the MAC address to permit or forbid specific clients to access the wireless network.
11N Wireless Broadband Router User Guide Chapter 6 DHCP Server 6.1 DHCP Server DHCP (Dynamic Host Control Protocol) is used to assign an IP address to the computers on the LAN/private network. When you enable the DHCP Server, the DHCP Server will allocate automatically an unused IP address from the IP address pool to the requesting computer in premise of activating “Obtain an IP Address Automatically”. So specifying the start and end address of the IP Address pool is needed.
11N Wireless Broadband Router User Guide Host name: It displays the name of the computer whose IP is allocated by the DHCP server. IP address: Enter the IP address which needs static binding. MAC address: Enter the MAC address of the computer you want to bind. Click “Add” to add the entry in the list. Lease time: The remaining time length of the corresponding IP address lease.
11N Wireless Broadband Router User Guide Chapter 7 Virtual Server 7.1 Port Range Forwarding Start/End port: Enter the start/end port number which ranges the External ports used to set the server or Internet applications. LAN IP: Enter the IP address of the PC which you want to set as the server. Protocol: Select the protocol (TCP/UDP/Both) for the application. If you are not clear about the protocol you are using, you can select “Both”.
11N Wireless Broadband Router User Guide Please follow the steps below to configure. 1.Enter 21 in both start port and end port fields, or you can also select FTP from the well-known service port and its port 21 will be added to the corresponding field automatically. 2. Enter 192.168.0.10 in the LAN IP column, and then select “Both” as the protocol and select “Enable”. 3. As the picture shown below. 4. Click the “Ok” button to save the settings.
11N Wireless Broadband Router User Guide 7.2 DMZ Settings The DMZ Settings screen allows one local computer to be exposed to the Internet for use of a special-purpose service such as Internet gaming or videoconferencing. DMZ hosting forwards all the ports at the same time to one PC. DMZ Host IP Address: The IP address of the LAN computer you want to set as DMZ host. Enable: Check to enable the DMZ host. For example: Set the computer at the IP address of 192.168.0.
11N Wireless Broadband Router User Guide Chapter 8 Security Settings 8.1 Client Filter Settings You can enable client filter to control LAN computers’ access to some ports of the Internet。 Filter Mode: You can select either “Permit only” or “Forbid only”. Access Policy: Select one number from the drop-down list. Remark: A simple description of the configured file. You can also leave it blank. Start/End IP: Enter the start/end IP address. Port: Enter the controlled TCP/UDP protocol port.
11N Wireless Broadband Router User Guide Example 2 Permit LAN computer with the IP address of 192.168.0.145 to access websites during 8:00 to 18:00 from Sunday to Saturday. 8.2 MAC Address Filter You can limit the computer’s access to Internet by MAC Address Filter.
11N Wireless Broadband Router User Guide Filter mode: You can select either “Permit only” or “Forbid only”. Access Policy: Select one number from the drop-down list. Remark: A simple description of the configured file. You can also leave it blank. MAC Address: Enter the MAC address you want to run the access policy. Time: Select the time range of MAC address Date: Select the day(s) to run the access policy. filter.
11N Wireless Broadband Router User Guide 8.3 URL Filter Settings You can use URL filtering to forbid their access to certain websites at a specified time. Filter Mode: You can select either “Permit only” or “Forbid only”. Access Policy: Select one number from the drop-down list. Remark: A simple description of the configured file. You can also leave it blank. Start/End IP: Enter the start/end IP address. URL character string: Time: Select the time range of URL filter.
11N Wireless Broadband Router User Guide NOTE: Enter only one domain name for each access policy for one access policy can only filter one domain name.
11N Wireless Broadband Router User Guide 8.4 Remote Web Management This section instructs how to allow the network administrator to manage the Router remotely. If you want to access the Router from outside of the local network, please click the checkbox after “Enable”. Enable: Check to enable remote web management. Port: The management port open to outside access. The default value is 80. IP Address: Specify the range of the IP addresses of the computers on the Internet for remote management.
11N Wireless Broadband Router User Guide Chapter 9 Routing Settings 9.1 Routing Table This page shows the router’s core routing table. The main duty for a router is to look for a best path for every data packet, and transfer this data packet to a destination station. In order to fulfill this function, many transferring paths, i.e. routing table, are saved in the router, for choosing when needed. 9.2 Static Routing This screen is used to set the router’s static routing.
11N Wireless Broadband Router User Guide Chapter 10 System Tools 10.1 Time Settings This section is to configure the router’s system time. You can set it manually or obtain the GMT time from the Internet. Time zone: Select the time zone where you are operating the Router from the drop-down list. Customized time: Enter the time you wish to configure. NOTE: When the Router is powered off, the time settings will be lost.
11N Wireless Broadband Router User Guide Main features: 1. Mostly, your ISP provides a dynamic IP address and the DDNS is used to capture the changeable IP address and match to the fixed domain. Then users can have access to the Internet to communicate with others outside the network. 2. DDNS can help you to establish a virtual host in your home or company. DDNS: Click the radio button to enable or disable the DDNS service.
11N Wireless Broadband Router User Guide Click the “Restore” button to restore previous settings. 10.4 Restore to Factory Default This screen allows you to restore all settings to the factory default values. Restore: Click this button to restore to default settings. Factory default settings: Password: NULL(the default password displays as null) IP address: 192.168.0.1 Subnet mask: 255.255.255.
11N Wireless Broadband Router User Guide 10.5 Upgrade By upgrading the router’s software, you’ll get better software version and appreciated routing function. Before upgrading, download the Router’s software upgrade file from our website, http://www.allnet.de Browse: Click this button to select the upgrade file. Upgrade: Click this button to start the upgrading process. After the upgrade is completed, the router will reboot automatically. 10.
11N Wireless Broadband Router User Guide 10.7 Password Change This section is to set a new password to better secure your router and network. Old password: Enter the old password. New password: Enter a new password. Confirm new password: Re-enter to confirm the new password. NOTE: The default password displays as null, users can log on the web-based utility without any authentication. To secure the router and your network, it is highly recommended that you change the initial password. 10.
11N Wireless Broadband Router User Guide Appendix 1 Glossary Channel: An instance of medium use for the purpose of passing protocol data units (PDUs) that may be used simultaneously, in the same volume of space, with other instances of medium use(on other channels) by other instances of the same physical layer (PHY),with an acceptably low frame error ratio(FER) due to mutual interference. SSID: SSID (Service Set Identifier) is the network name shared by all devices in a wireless network.
11N Wireless Broadband Router User Guide Appendix 2 Product Features Supports IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3 and IEEE 802.3u standards. High gain omni-directional antenna, with strong signals and long transmission distance.
11N Wireless Broadband Router User Guide Appendix 3 FAQ This section provides some solutions to the problems which may occur during the router’s installation or usage. The instructions below may help you deal with the problems. If your problem is not in the list, please log into our website http://www.allnet.de or send an E-mail to support@allnet.de , and we will reply to you at the earliest time. 1.
11N Wireless Broadband Router User Guide related service port. For example, Web server’s port is 80; FTP is 21; SMTP is 25 and POP3 is 110. Step 2: In the router’s web click “Virtual Server” and select “Port Range Forwarding”. Step 3: Input the service port provided by the router (i.e. the external port) for mapping the internal and external network, for example, 80-80. Step 4: input the internal Web service port, for example, 80-80. Step 5: Input the internal server’s IP address.
11N Wireless Broadband Router User Guide Appendix 4 Clear Wireless Configuration Clear Wireless configuration file under windows XP 1. Right click “My Network Places” on your computer desktop and select “Properties”. 2. Right click “Wireless Network Connections” and select “Properties”. 3. Click “Wireless Network Configuration” and clear the corresponding wireless configuration file as shown below.
11N Wireless Broadband Router User Guide Clear Wireless configuration file under windows 7 1. Right click “Network” and click “Properties”. 2. Click “Manage wireless networks” on the left side of the window. 3. Delete the corresponding configured file in the “Manage wireless networks”.
11N Wireless Broadband Router User Guide Appendix 5 Regulatory Information EU Declaration or Declaration of Conformity Hereby, ALLNET GMBH, Maistr. 2 82110 Germering, declares that this Wireless Broadband Router is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
11N Wireless Broadband Router User Guide The safety advice in the document accompanying the p products shall be obeyed. The conformity to the above directive is indicated by the CE sign on the device. The ALLNET ALL02800N conforms to the Council Directives of EC EMC 2004/108/EC with CE marking requirement. This equipment meets the the following conformance standards: This equipment is intended to be operated in all countries. This declaration is made by ALLNET Deutschland GmbH Maistr.
