Operation Manual

11N Wireless Broadband Router User Guide
13
4.2 WAN Settings
Virtual Dial-up (PPPoE)
 Mode: Show your current connection mode.
 Access Account: Enter the account provided by your ISP.
 Access Password: Enter the password provided by your ISP.
 MTU: Maximum Transmission Unit. It is the size of the largest data packet that can be sent over
the network. The default value is 1492. Do NOT modify it unless necessary, but if a specific
website or web application software cannot open or be enabled, you can try to change the MTU
value to 1450, 1400, etc.
 Service Name: The connection name for current PPPOE, enter it if necessary，otherwise, leave it
blank.
 AC Name: The service name, enter it if necessary，otherwise, leave it blank.
 Connect Automatically: Connect automatically to the Internet after rebooting the system or
connection failure.
 Connect on Demand: Re-establish your connection to the Internet after the specific time (Max
Idle Time). Zero means you are connected to the Internet all times. Otherwise, enter the minutes
to be elapsed before you are disconnected from the Internet.
 Connect Manually: Connect to the Internet by users manually.
 Connect on Fixed Time: Connect to the Internet during the time you fix automatically.
NOTE:
The “Connect on Fixed Time” goes into effect only when you have set the current time in “Time
settings” from “System tools”.