Operation Manual

11N Wireless Broadband Router User Guide
25
After finishing the above steps, you need to set the other ALL02300N router in the same way.
NOTE:
WDS feature requires both routers support this function and the SSID, channel, encryption method and
password are the same as those of the connecting router.
5.2 Wireless Security Settings
With the wireless security function, you can prevent others from connecting to your wireless network and
using the network resources without your consent. Meanwhile, you can also block illegal users from
intercepting or intruding your wireless network.
5.2.1 WPS Settings
WPS (Wi-Fi Protected Setting) makes it quick and easy to establish a secure connection between the
wireless clients and the router. The users only need to enter a PIN code or press WPS button on the
back panel to configure it without manually selecting an encryption method or set a key.
 WPS settings: To enable or disable WPS function. The default is “Enable”.
 WPS mode: Provide two ways: PBC (Push-Button Configuration) and PIN code.
 PBC: Select the PBC and click Ok, or press and hold the WPS button on the back panel of the
device for about one second. The WPS LED indicator will be flashing for 2 minutes, which means
the WPS is enabled. During this time (flashing WPS LED), you can enable the wireless client to
implement the WPS/PBC negotiation between them. When the WPS connection is completed, the
LED indicator will be continuously lit. To add more clients, repeat the above steps.)
 PIN: If this option is enabled, you need to enter a wireless client’s PIN code in the field and keep
the same code in the WPS client.
 Reset OOB: Press this button, the WPS client will be in an idle state, and the WPS indicator will
turn off. AP will not respond to the WPS client’s connection request and will set the security mode
as Open-None (Disable) mode.