Operation Manual

11N Wireless Broadband Router User Guide
27
 Key: Enter the pass phrase that consists of 8-63 ASCII characters.
 Key Renewal Interval: Set the key’s renewal period, which tells the device how often it should
change the dynamic keys.
5.3 Wireless Access Control
Wireless access control is actually based on the MAC address to permit or forbid specific clients to
access the wireless network.
 MAC address filter: “Permit” indicates to allow the clients in the list to access the wireless
network, “Forbid” indicates to prevent the clients in the list from accessing the wireless network.
 Configure MAC address: Input the MAC addresses of the wireless clients to implement the filter
policy. Click “Add” to finish the MAC add operation.
 MAC Address list: Show the added MAC addresses. You can add or delete them.
5.4 Connection Status
This screen shows wireless client’s connection status, including MAC address, Channel bandwidth.
 MAC address: Shows the MAC addresses of the hosts connected to the Router.
 Bandwidth: Shows the channel bandwidth of the current connected hosts (wireless clients).