Operation Manual

11N Wireless Broadband Router User Guide

Please follow the steps below to configure.

1.Enter 21 in both start port and end port fields, or you can also select FTP from the well-known service

port and its port 21 will be added to the corresponding field automatically.

2. Enter 192.168.0.10 in the LAN IP column, and then select “Both” as the protocol and select “Enable”.

3. As the picture shown below.

4. Click the “Ok” button to save the settings.

And now, when your friends want to visit the FTP server, they only need to enter ftp://xxx.xxx.xxx.xxx:21

in the address field. Here, xxx.xxx.xxx.xxx means the router’s WAN IP address. For example, when your

router’s WAN IP address is 172.16.102.89; your friends need to enter ftp://172.16.102.89:21 in the

address field.

NOTE:

If you set the service port of the virtual server as 80, you must set the Web management port on Remote

Web Management screen to be any value except 80 such as 8080. Otherwise, there will be a conflict to

disable the virtual server.