Operation Manual

11N Wireless Broadband Router User Guide
38
8.4 Remote Web Management
This section instructs how to allow the network administrator to manage the Router remotely. If you want
to access the Router from outside of the local network, please click the checkbox after “Enable”.
 Enable: Check to enable remote web management.
 Port: The management port open to outside access. The default value is 80.
 IP Address: Specify the range of the IP addresses of the computers on the Internet for remote
management.
NOTE:
1. If you want to log in the device’s Web-based Utility via port 8080, you need to use the format of WAN
IP address: port (for example http://212.18.34.50:8080) to implement remote login.
2. If your WAN IP address starts and ends with 0.0.0.0, it means all hosts on the Internet can implement
remote Web management.
For example:
If you want to configure the computer at the IP address of 218.88.93.33 to access the router’s
web-based utility via port 8080, please set the parameters as above.