ALL0236R Wireless N Extender User’s Manual V1.
Wireless N Extender Version 1.0 Table of Contents ABOUT THE DEVICE ................................................................................................................................ 3 MINIMUM SYSTEM REQUIREMENTS............................................................................................................ 4 PACKAGE CONTENTS .................................................................................................................................. 4 DEVICE OVERVIEW ........
Wireless N Extender Version 1.0 About the Device ALLNET ALL0236R Portable 300Mbps Wireless-N Extender supports wireless 802.11b/g/n standards with one 10/100Base-T Ethernet port. ALL0236R is designed with MIMO technology to extend the reach of any existing wireless router/AP to maximize the coverage in your home or office. It basically receives the signal from your wireless router/AP and repeats it to extend the range to farther locations that are previously unreachable.
Wireless N Extender Version 1.0 Minimum System Requirements Your computer must meet the following minimum requirements. Any operating system can be usedWeb Browser 233MHz processor Ethernet network adapter Or Wireless network adapter Package Contents Package contents are listed below. For any missing items, please contact your dealer immediately. Product contents may vary for different models.
Wireless N Extender LABEL POWER LED Version 1.
Wireless N Extender Version 1.0 NOTE: Placement of the Wireless Extender is crucial to get the best possible results for extending your existing wireless signal. It is ideal for the wireless extender to be placed in a location where it can receive good wireless signal from the wireless router/AP so as to avoid disconnection and packet loss. Setup Your Device Setting up the device is easy. Simply follow the steps below to connect the device to your existing wireless router/AP.
Wireless N Extender Version 1.0 To Setup your device via the Web GUI: 1. Connect the ALL0236R to a power outlet. 2. Connect a PC/laptop to the Wireless Extender. For WIRED Connection Plug an Ethernet cable to the Ethernet port at the base portion of the device. For WIRELESS Connection You can find the default SSID and wireless security information from the sticker located at the back of the device. 3.
Wireless N Extender Version 1.0 NOTE: If you are connecting to a hidden wireless network, you need to key-in the information from your existing wireless router/AP manually. 8. Choose the Operation mode from the drop-down box 9. Click the Site Survey button to show the list of available wireless networks 10. Click the Connect button located on the right side of the Wireless network you want to connect to 11. Key-in the wireless network key/passphrase 12.
Wireless N Extender Version 1.0 Use the Device as a Wireless Repeater Once the wireless connection from the ALL0236R to the main AP/router is established you can connect your wireless devices like laptops and smartphones through the wireless repeater. These devices will obtain an IP address from the main AP/router and should be able to access the Internet from farther locations previously unreachable by your wireless signal.
Wireless N Extender Version 1.0 Changing the Wireless Settings Modify the default Wireless Settings to suit your own preference. To change the Wireless settings via the Web GUI: 1. Open your browser 2. Type 192.168.1.1 on the address bar 3. Input admin for both username and password fields and click on OK 4. On the top pane, click the Wireless button to show the menu 5. You can change the advanced wireless settings as preferred from this page 6. Click Apply to commit the changes 7.
Wireless N Extender Version 1.0 Changing the Wireless Security Settings Modify the default Wireless Security Settings to suit your own preference. To change the Wireless security settings via the Web GUI: 1. Open your browser 2. Type 192.168.1.1 on the address bar 3. Input admin for both username and password fields and click on OK 4. Click the Wireless button, and click the Security menu. You can change the wireless security settings as preferred from this page 5. Click Apply to commit the changes 6.
Wireless N Extender Version 1.0 WPS WPS or Wifi Protected Setup makes it easy for wireless clients to connect to the wireless repeater. Simply press the WPS button on the repeater and press the WPS button on the wireless client within 2 minutes, and the wireless security authentication will be done automatically. Configuring Wireless MAC Filtering Wireless MAC Filtering allows you to select which wireless clients to allow or deny access to the Wireless Repeater.
Wireless N Extender Version 1.0 Viewing the Home Page The Home Page will tell you information about your device. To view the Home Page via the Web GUI: 1. Open your browser 2. Type 192.168.1.1 on the address bar 3. Input admin for both username and password fields and click on OK 4. AP Client Connection Status displays the Connection status and SSID of the Access Point being extended. 5. Wireless Client List displays the current wireless clients connected to the repeater.
Wireless N Extender Version 1.0 What’s on System Management System Management includes the following options: Information Firmware Reboot Password Information This page shows the device information. Below is the list of information shown in this menu.
Wireless N Extender Version 1.0 Firmware Firmware menu allows you to see the current firmware version and build date as well as upgrade the firmware of the device. Firmware Information – Shows the current firmware’s version and build date Firmware Upgrade – Load a new firmware upgrade file to the device NOTE: Make sure you connect to the device via Ethernet cable when upgrading the firmware to avoid corruption during the firmware upgrade procedure.
Wireless N Extender Version 1.0 3. Click on Network Connections 4. Right-Click on the Network Adapter you will use to configure the wireless repeater and click Properties 5.
Wireless N Extender Version 1.0 6. Select “Use the following IP address:” and key in 192.168.1.2 as the IP address and 255.255.255.0 for the Subnet mask. Leave the other fields blank. 7. Click OK to commit the settings.
Wireless N Extender Version 1.0 Set a static IP address on your PC using Windows Vista 1. Click Start > Control Panel 2. Double-Click Network and Sharing Center 3. Click Manage network connections 4.
Wireless N Extender Version 1.0 5. Click to select Internet Protocol Version 4 (TCP/Ipv4) and click Properties 6. Select “Use the following IP address:” and key in 192.168.1.2 as the IP address and 255.255.255.0 for the Subnet mask. Leave the other fields blank. 7. Click OK to commit the settings.
Wireless N Extender Version 1.0 Set a static IP address on your PC using Windows 7 1. Click Start > Control Panel 2. Click View network status and tasks 3. Click Change adapter settings 4.
Wireless N Extender Version 1.0 5. Click to select Internet Protocol Version 4 (TCP/Ipv4) and click Properties 6. Select “Use the following IP address:” and key in 192.168.1.2 as the IP address and 255.255.255.0 for the Subnet mask. Leave the other fields blank. 7.
Wireless N Extender Version 1.0 Safety Precautions Do not open, service, or change any component. Only qualified technical specialists are allowed to service the equipment. Observe safety precautions to avoid electric shock Check voltage before connecting to the power supply. Connecting to the wrong voltage will damage the equipment. © Copyright 2010 All rights reserved.
Wireless N Extender Version 1.0 No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying, recording, information recording, or through retrieval systems without the express written permission. We reserve the right to revise this document at any time without the obligation to notify any person and/or entity.
Wireless N Extender Version 1.0 Copyright © 2010. All rights reserved. No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying, recording, information recording, or through retrieval systems without the express written permission of the owner. Product specifications contained in this document are subject to change without notice.
Wireless N Extender Version 1.0 Konformitätserklärung Declaration of Conformity Hersteller / Manufacturer: ALLNET GmbH Produkt / Product: ALL0236R Typ / Type: Wireless N Extender Compliance to those standards are required for the following Directives; Directive 1999/5/EC R&TTE Application of the CE Mark is permitted only after all applicable requirements are met in accordance with the European Union Rules, including the manufacturer’s issuance of a „Declaration of Conformity“.
