User manual

User Manual
Page 2
About the Device
ALLNET ALL0238RD is a dual band Wall-plugged 300Mbps Wireless-N
Repeater, which supports wireless 802.11b/g/n, and one 10/100 Base-T
Ethernet port.
Repeat and Extend the WiFi Network
ALL0238RD supports robust 802.11n technology with up to 300Mbps data
transfer rate. The Repeater can take an existing 802.11n wireless signal,
repeat and extend it to a longer range where it is too far away for the
router or access point to reach. It eliminates the cable wires while
providing the same reliable network connection. It can repeat and extend
the wireless signal from virtually any 802.11n wireless router or access point
that is launched on the market. It is backwards compatible with the
802.11b/g router or access point.
Make Wired Network WiFi Ready
The Repeater is equipped with 1 x 10/100M Auto MDI/MDIX LAN port that can
be used to connect to an existing wired network to serve as a wireless
interface. It can also be used to configure the Repeater via its web-based
GUI, or upgrade the firmware.
MIMO Technology
The device is designed with MIMO technology, which successfully reduces
areas with weak wireless network coverage within a home or in the building.
Advanced Security
ALL0238RD features with 64/128-bit WEP encryption and WIFI Protected
Access (WPA), WPA2 to ensure the network security and prevent
unauthorized access to you network.
Portable without the Need of External Power Supply
The device is easy to setup. It is portable with no need of any external power
adaptor. It comes with the embedded power supply and power plug, so that
users can just plug the device into a power socket.