User manual

2.4 Hardware Installation

1. Ensure that the computer in use has an available Ethernet (RJ-45) Port. For

more information, verify with your computer’s user manual.

2. Connect one end of the Category 5e Ethernet cable into the RJ-45 port of the

ALL02880ND and the other end to the RJ-45 port of the computer. Ensure that

the cable is securely connected to both the ALL02880ND and the computer.

3. Connect the Power Adapter DC connector to the DC-IN port of the

ALL02880ND and the Power Adapter to an available electrical outlet. Once

both connections are secure, verify the following:

a) Ensure that the POWER light is on (it will be orange).

b) Ensure that the 2.4GHz/5GHz WLAN light is on (they will be blue).

c) Ensure that the LAN (Computer/ALL02880ND Connection) light is on (it

will be blue).

d) Once all lights are on, proceed to set up the ALL02880ND using the

computer.

This diagram depicts the hardware configuration.