User manual

ALL02880ND User’s Manual
47
7.4 Wireless MAC Filtering
Wireless MAC Filtering is used to allow or deny network access to wireless clients
(computers, tablet PCs, NAS, smartphones, etc.) according to their MAC addresses.
You can manually add a MAC address to restrict the permission to access
ALL02880ND. The default setting is Disable Wireless MAC Filter.
Note: Only applicable in Access Point, WDS AP and Repeater mode.
Wireless MAC Filter (Access Point / WDS AP / Repeater mode)
ACL Mode Determines whether network access is granted or denied to clients whose MA
C
appear in the MAC Address table on this page. Choices are: Disabled, Deny M
A
Allow MAC in the list.
MAC Address Enter the MAC address of the wireless client.
Add Click Add to add the MAC address to the MAC Address table.
Delete Delete the selected entries.
Apply Click Apply to apply the changes.