User manual

ALL02880ND Manual
49
2.4G/5G Wireless Advanced
Data Rate Select a data rate from the drop-down list. The data rate affects
throughput of data in the ALL02880ND. The lower the data rate, the
throughput will be lower, but so will the transmission distance.
Transmit Power Set the power output of the wireless signal.
RTS/CTS Threshold Specify the threshold package size for RTC/CTS. A small number
causes RTS/CTS packets to be sent more often and consumes more
bandwidth.
Distance Specify the distance between Access Points and clients. Longer
distances may drop high-speed connections.
Aggregation Merges data packets into one packet. This option reduces the number
of packets, but increases packet sizes.
WMM Parameters WMM (Wi-Fi Multimedia) manages the priority of audio, video and
voice data over a Wi-Fi network so that data from other applications
are less likely to interfere with transmission. The parameters CWmin,
CWmax and AIFS together control the priority of the four access
categories (AC). Note: Only applicable in Access Point and WDS AP
mode.
Client Limit Check Enable and enter a number to limit the maximum client
connection (The maximum is 127). Note: Only applicable in Access
Point, WDS AP and Repeater mode.
Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return
previous settings.
Note: WMM Parameters is only applicable in Access Point and WDS AP mode.
Client Limit is only applicable in Access Point, WDS AP and Repeater mode.