User manual

ALL02880ND Manual
6
802.11 a/b/g devices
Multiple Operation Modes Allowing users to select any one of the following
modes: Access Point, Client Bridge, WDS AP, WDS
Bridge, WDS Station and Repeater depending on
their specific networking deployment need.
Support Multiple SSIDs in AP
mode (up to 8 in each
frequency band)
Allows clients to access different networks through
a single access point and assign different policies
and functions for each SSID through the built-in
software.
WPA/WPA2/IEEE 802.1x
Support
Supports industry-standard wireless encryption.
MAC Address Filtering in AP
Mode
For more secure network connections with known
users and devices.
User Isolation Support (AP
mode)
Offers an additional layer of protection within the
network by isolating specific client users.
Power-over-Ethernet
(IEEE802.3at/af)
Allows installers to deploy the ALL02880ND in
locations via a PoE connection (Ethernet cable)
where a power outlet may not be available.
Save User Settings Enables network administrators to save their device
settings so firmware upgrades do not permanently
delete previous device settings.
SNMP Remote Configuration
Management
Allows remote connection to configure or manage
the ALL02880ND easily.
QoS (WMM) support Prioritizes bandwidth-intensive and sensitive data
traffic.
IPv6 Address support ALL02880ND supports IPv6, you can use IPv6
address in ALL02880ND.
Band Steering When Band Steering is activated dual-band client
devices are associated to the ALL02880ND access
point on the 5 GHz frequency band.
1.2 Package Contents
The ALL02880ND package contains the following items (Resellers and dealers require
that all items must be in package to issue a refund):
 ALL02880ND Access Point/Client Bridge
 12V/2A 100V~240V Power Adapter
 RJ-45 Ethernet LAN Cable