User manual

ALL02880ND User’s Manual
72
8.11 Diagnostics
The diagnostics feature allows the administrator to verify that another device is
available on the network and is accepting request packets. If get ping packet response,
it means a device is on line. This feature does not work if the target device is behind a
firewall or has security software installed.
Diagnostics
Target IP Enter the IP address you would like to search.
Ping Packet Size Enter the packet size of each ping.
Number of Pings Enter the number of times you want to ping.
Start Ping Click Start Ping to begin pinging target device (via IP).
Traceroute
Target
Enter an IP address or domain name you want to trace.
Start Traceroute Click Start Traceroute to begin the trace route operation.
Target Address Enter the IP address of the target PC.
Time period Enter time period for the speed test.
Check Interval Enter the interval for the speed test.
Start Speed Test Click Start Speed Test to begin the speed test operation.
IPv4 / IPv6 Port ALL02880ND use IPv4 port 5001 and IPv6 port 5002 for the speed test.