Datasheet

Note: Product speci cation is subject to change without notice.

www.allnet.de

Power over Ethernet Gigabit Injector / Smart Plug and

Play / IEEE802.3af/at/at++ 90 Watt

• support IEEE802.3, IEEE802.3u, IEEE802.ab,IEEE802.3af, IEEE802.3at and LT

PoE 90W

• 1 Port 10/100/1000 Base-T (Data) for connection to a switch, and

1 Port 10/100/1000 Base-T (Power/Data) for connection to a PoE Device (PD)

• Automatic detection of whether the connected device is PoE capable

ALLNET

ALL048900V2

Article: 112270

PAGE 1
ALLNET ALL048900V2 Power over Ethernet Gigabit Injector / Smart Plug and Play / IEEE802.3af/at/at++ 90 Watt • support IEEE802.3, IEEE802.3u, IEEE802.ab,IEEE802.3af, IEEE802.3at and LT PoE 90W • 1 Port 10/100/1000 Base-T (Data) for connection to a switch, and 1 Port 10/100/1000 Base-T (Power/Data) for connection to a PoE Device (PD) • Automatic detection of whether the connected device is PoE capable Article: 112270 Note: Product specification is subject to change without notice. www.allnet.
PAGE 2
With the ALLNET ALL048900V2 High Power PoE Injector you install your PoE-enabled IP devices such as wireless access points, VoIP phones and much more totally independent of existing electrical outlets. So can choose the best locations for example WLAN Access Points Installations in a building regarding the wireless technology, without having to worry about Power cabling. Non-PoE switches can be efficiently „upgraded“ with Power over Ethernet, especially when you only need a few ports with PoE power supply.
PAGE 3
Overview of supported PoE standards and cable assignment The ALL048900V2 supports various PoE devices. The devices are scanned by the injector and will be automatically provided with the correct power. The table shows an overview of all supported standards and power levels.