ALL9600T ALL9600R User's Manual AV Extender One-Port AV Transmitter : ALL9600T One-Port AV Receiver : ALL9600R (C) 2006 ALLNET, All Rights Reserved
User’s Manual One-Port AV Transmitter : ALL9600T One-Port AV Receiver : ALL9600R
TABLE OF CONTENTS 4 Introduction 5 Key Features 7 Panel Description 9 Installation and Operation 12 Specification 13 Order Information 14 Remarks
User’s Manual / Introduction ALL9600 is a broadcast system to transmit AV signal (Audio + VGA) over Cat5/5e/6 cable, it can reach the distance up to 300 meters and by stacking more system Transceivers, the whole system can extend AV signal up to 900 meters. You can broadcast the AV signal from PC, KVM switch, matrix AV switcher, or use optional TV Box or converter to connect DVD or other multimedia output devices.
/ Key Features 1. ALL9600 can send VGA and Audio signal from Transmitter over single Cat5/5e/6 cable, and broadcast AV signal in Receiver. The standard maximum broadcasting distance is 300 meters. 2. Remote and local monitors and speakers can broadcast simultaneously 3. Use Cat5 Enhance UTP cable (350MHz bandwidth) for best video quality 4. Receiver build in video GAIN and FOCUS control to adjust the video quality. 5. Software free, pure hardware design, support Plug & Play 6.
User’s Manual 11.
/ Panel Description 1. ALL9600T Single-Port AV Transmitter ❻❼ ❶ ❽ ❷ ❶ ❷ ❸ ❹ Power Indicator Power Jack VGA+Audio Output VGA+Audio+USB Power Input ❺ ❻ ❼ ❽ ❸ ❹ ❺ RJ-45 AV Output H. Sync Activity V. Sync Activity Magnetic Pad 2. ALL9600R Single-Port AV Receiver ❶ ❻❼ ❽ ❷ ❶ ❷ ❸ ❹ Power Indicator Power Jack VGA+Audio Output Video Control ❺ ❻ ❼ ❽ ❸ ❹ ❺ RJ-45 AV Output H. Sync Activity V.
User’s Manual 3.
/ Installation and Operation 1. ALL9600T Single-Port Transmitter Installation: (1) Site Selection: In your first time installation, place Transmitter near the PC or AV devices (Audio and Video outputs); you can use magnetic pad to attach the unit on metal plane (Ex. PC / Server Enclosure) or use attachable rack mounting kit to fix the unit on selected area by screw or nail.
User’s Manual (3) Function Test: Turn on your AV device, the POWER LED should turn on green to indicate the POWER ON status and the LEDs above RJ-45 will blink before VGA signal is turned ON and remain ON after VGA signal is turned ON. 2. Receiver ALL9600R installation and UTP Connection (1) Site Selection: Please place Receiver in an appropriate place and have the UTP cable settled for later connection.
(4) Connect UTP Cable: Plug two ends of UTP cable to Transmitter and Receiver’s RJ45 UTP link ports, the Receiver’s connected monitor and speaker should work now. You can adjust the FOCUS and GAIN control of Receiver to have the best VGA display.
User’s Manual / Specification Spec AV Transceiver Model ALL9600T ALL9600R Description 1 Port Transmitter 1 Port Receiver RJ45 x 1 AV INPUT AV x 1 AV OUTPUT AV x 1, RJ45 x1 AV x 1 Video CTRL - Video Gain and Focus LED Two Color LEDs Video Quality Maximum VGA Resolution and Distance : 2048 x 1536@300m Dimension (LxWxH) Power Consumption Environmental Condition 12 AV Receiver 62 x113 x 29 USB DV5V Power or AC 7.5V 250mA • Operation Temp.: 0~50˚C DC 7.5V, 250mA • Storage Temp.
/ Order Information Order Details Part Number Remark One-Port ALL9600 AV Transmitter ALL9600T AVU Cable x 1, Rack-mount Kit x 1 One-Port ALL9600 AV Receiver ALL9600R With AC7.
User’s Manual / Remarks (1) Before operating this system, please read operation manual carefully. (2) Please use correct power adapter and use high quality cable for optimum broadcasting. (3) To prevent potential power damage, please don’t use 2 -wire extension cord and ensure AC outlets at relative devices on the same electronic phase and have correct grounding. (4) Limited Warranty : A.
(C) 2006 ALLNET, All Rights Reserved
