Operation Manual

V
V
P
P
N
N
D
D
U
U
A
A
L
L
-
-
W
W
A
A
N
N
R
R
o
o
u
u
t
t
e
e
r
r
99
Previous Page/Next
Page, Jump to __/__
Page, __ Entries Per
Page
Click Previous page or Next page to view the desired VPN tunnel
page. Or users can select the page number directly to view all VPN
tunnel statuses, such as 3, 5, 10, 20 or All.
Tunnel No.
To set the embedded VPN feature, please select the tunnel number. It
supports up to 300 IPSec VPN tunnel Setting (gateway to gateway as
well as client to gateway).
Status:
Successful connection is indicated as-(Connected).
Failing hostname resolution is indicated as - (Hostname Resolution
Failed).
Resolving hostname is indicated as -(Resolving Hostname)
Waiting to be connected is indicated as - (Waiting for Connection).
If users select Manual setting for IPSec setup, the status message will
display as “Manual” and there is no Tunnel test function available for
this manual setting.
Account ID:
Displays the current VPN tunnel connection name, such as XXX
Office. Users are well-advised to give them different names to avoid
confusion should users have more than one tunnel settings.
Note: If this tunnel is to be connected to other VPN device (not this
device), some device requires that the tunnel name is identical to the
name of the host end to facilitate verification. This tunnel can thus be
successfully enabled.
Phase2
Encrypt/Auth/Group:
Displays settings such as encryption (DES/3DES), authentication
(MD5/SHA1) and Group (1/2/5).
If users select Manual setting for IPSec, Phase 2 DH group will not
display.
Local Group:
Displays the setting for VPN connection secure group of the local end.