Operation Manual

V
V
P
P
N
N
D
D
U
U
A
A
L
L
-
-
W
W
A
A
N
N
R
R
o
o
u
u
t
t
e
e
r
r
100
Remote Group:
Displays the setting for remote VPN connection secure group.
Remote Gateway:
Set the IP address to connect the remote VPN device. Please set the
VPN device with a valid IP address or domain name.
Control:
Click “Connect” to verify the tunnel status. The test result will be
updated. To disconnect, click “Disconnect” to stop the VPN
connection.
Config:
Setting items include Edit and Delete icon.
Click on Edit to enter the setting items and users may change the
settings. Click on the trash bin icon and all the tunnel settings will
be deleted.
__ Tunnel(s) Enabled:
__ Tunnel(s) Defined:
This displays how many tunnels are enabled and how many tunnels
are set.
VPN Group Tunnel Status:
If there is no setting for Group VPN, there will be no display of VPN Group status.
Group Name:
Displays the tunnel name of the Group VPN that is connected.
Connected Tunnels:
Displays the VPN Groups tunnel numbers.
Phase2
Encrypt/Auth/DH:
Displays settings such as encryption (DES/3DES), authentication
(MD5/SHA1) and Group (1/2/5).
If users select Manual setting for IPSec, Phase 2 DH group will not be
displayed.
Local Group:
Displays the VPN connection secure setting for the local group.