Operation Manual

V
V
P
P
N
N
D
D
U
U
A
A
L
L
-
-
W
W
A
A
N
N
R
R
o
o
u
u
t
t
e
e
r
r
137
Multiple to One NAT
Enable Multiple to One NAT
Click to enable multiple to one NAT function.
Private IP Range
Input intranet IPs for NAT mapping.
Respective Public IP
Input the respective public IP addresses. This should go
along with the following interface selection. If the IP
address is not within the interface ranges, the setting will
not work.
Interface
Select the mapping interface. If the WAN IP above is not
within the interface range, the setting will not work.
Add to List
Add this configuration to the One-to-One NAT list.
Delete selected range
Remove a selected One-to-One NAT list.
Apply
Click “Apply” to save the network configuration
modification.
Cancel
Click “Cancel" to leave without making any changes.
10.5 DDNS- Dynamic Domain Name Service
DDNS supports the dynamic web address transfer for DynDNS.org and DtDNS.com. This is for
VPN connections to a website that is built with dynamic IP addresses, and for dynamic IP remote
control. For example, the actual IP address of an ADSL PPPoE time-based system or the actual IP of a
cable modem will be changed from time to time. To overcome this problem for users who want to build